Details

---

BUY IPA60R280P7S https://www.utsource.net/itm/p/12606022.html

Parameter	Symbol	Test Conditions	Min	Typical	Max	Unit
Continuous Drain Current	ID	VGS = 10V, TA = 25掳C	-	330	-	A
Pulse Drain Current	ID pul	VGS = 10V, tp = 10ms, TC = 25掳C	-	550	-	A
Gate-Source Voltage	VGS	-	-20	0	20	V
Drain-Source Breakdown Voltage	VDS(off)	ID = 250渭A, IG = 0mA	600	-	-	V
On-State Resistance	RDS(on)	VGS = 10V, ID = 330A, TA = 25掳C	-	280	-	m惟
Gate Charge	QG	VGS = 15V, IG = 1A	-	220	-	nC
Input Capacitance	Ciss	VDS = 450V, f = 1MHz	-	2400	-	pF
Output Capacitance	Coss	VDS = 450V, f = 1MHz	-	220	-	pF
Reverse Transfer Capacitance	Crss	VDS = 450V, ID = 1A, f = 1MHz	-	220	-	pF
Total Switching Energy	Esw	VDS = 450V, ID = 330A, fsw = 100kHz	-	1.9	-	mJ
Thermal Resistance (Junction to Case)	Rth(j-c)	-	-	0.25	-	掳C/W
Junction Temperature	TJ	-	-	175	-	掳C
Storage Temperature Range	TSTG	-	-65	-	150	掳C

Instructions for Use:

1. Handling and Storage:

   • Store the device in a dry, cool place.
   • Handle with care to avoid mechanical damage and static discharge.

2. Mounting:

   • Ensure proper heat sinking to maintain junction temperature within specified limits.
   • Use recommended torque values for screw terminals to avoid over-tightening or under-tightening.

3. Electrical Connections:

   • Connect the gate and source terminals carefully to avoid short circuits.
   • Use low inductance gate drive circuits to minimize switching losses.

4. Thermal Management:

   • Monitor the junction temperature to ensure it does not exceed 175掳C.
   • Use thermal paste or thermal interface materials between the device and heat sink for better thermal conductivity.

5. Operational Parameters:

   • Do not exceed the maximum ratings for drain-source voltage, gate-source voltage, and continuous drain current.
   • Ensure the gate drive voltage is within the specified range to avoid damage to the device.

6. Testing:

   • Perform initial testing at room temperature and gradually increase the load to ensure stable operation.
   • Regularly check the device parameters during operation to ensure they remain within the specified limits.

7. Safety Precautions:

   • Always use appropriate safety equipment when handling high-voltage circuits.
   • Follow all relevant safety standards and guidelines for high-power electronics.

By adhering to these instructions, you can ensure reliable and efficient operation of the IPA60R280P7S MOSFET.

(For reference only)