Details

---

BUY N2041LD https://www.utsource.net/itm/p/12606034.html

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	2.7	-	5.5	V
Output Current	Iout	-	200	300	mA
Operating Temperature	Topr	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C
Quiescent Current	Iq	-	50	100	渭A
Output Voltage Drop	Vd	-	0.2	0.4	V
Reverse Voltage	Vr	-	-	0.3	V

Instructions for Using N2041LD

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 2.7V to 5.5V to avoid damage to the device.

2. Output Current (Iout):

   • The device can provide a typical output current of 200mA, with a maximum of 300mA. Do not exceed the maximum current to prevent overheating and potential failure.

3. Operating Temperature (Topr):

   • The operating temperature range is from -40掳C to 85掳C. Ensure the device is used within this range to maintain optimal performance.

4. Storage Temperature (Tstg):

   • When storing the device, keep it within the temperature range of -65掳C to 150掳C to prevent damage.

5. Quiescent Current (Iq):

   • The quiescent current is typically 50渭A and should not exceed 100渭A. This is the current consumed by the device when no load is applied.

6. Output Voltage Drop (Vd):

   • The output voltage drop across the device is typically 0.2V and should not exceed 0.4V under normal operating conditions.

7. Reverse Voltage (Vr):

   • The device can withstand a reverse voltage of up to 0.3V. Exceeding this value can cause damage.

Additional Notes:

• Always ensure proper heat dissipation if the device is expected to operate at high currents or temperatures.
• Use appropriate decoupling capacitors to stabilize the supply voltage and reduce noise.
• Refer to the datasheet for detailed information and specific application circuits.

(For reference only)