Details

---

BUY 75160AN https://www.utsource.net/itm/p/12606041.html

Parameter	Description	Value	Unit
Part Number	Component Identifier	75160AN	-
Function	Device Function	Voltage Regulator	-
Input Voltage Range	Range of Input Voltages	2.7 to 5.5	V
Output Voltage	Fixed Output Voltage	3.3	V
Output Current	Maximum Continuous Output Current	150	mA
Dropout Voltage	Voltage Difference Between Input and Output for Regulation	0.4	V (max) @ 150mA
Quiescent Current	Current Consumed by the Device Itself	80	渭A (typ)
Shutdown Current	Current Consumption in Shutdown Mode	1	渭A (max)
Operating Temperature Range	Range of Ambient Temperatures for Normal Operation	-40 to 125	掳C
Storage Temperature Range	Range of Temperatures for Storage	-65 to 150	掳C
Package Type	Physical Enclosure of the Device	SOT-23	-
Pin Configuration	Number of Pins	5	-

Instructions for Use:

1. Power Supply Connection:

   • Connect the input voltage to the VIN pin.
   • Connect the output voltage to the VOUT pin.
   • Ensure the input voltage is within the specified range (2.7V to 5.5V).

2. Ground Connection:

   • Connect the GND pin to the system ground.

3. Capacitors:

   • Place a 1渭F ceramic capacitor between VIN and GND as close to the device as possible.
   • Place a 1渭F ceramic capacitor between VOUT and GND as close to the device as possible.

4. Shutdown Feature:

   • To enable the shutdown feature, connect the SHDN pin to GND. The device will enter a low-power mode with minimal current draw.
   • To activate the regulator, leave the SHDN pin open or connect it to VIN.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if operating at high output currents or in high ambient temperatures.
   • The device can operate up to 125掳C, but thermal management may be necessary for prolonged operation at high temperatures.

6. Storage and Handling:

   • Store the device in a dry environment within the specified storage temperature range (-65掳C to 150掳C).
   • Handle with care to avoid damage to the pins and package.

7. Soldering:

   • Use a soldering iron with a fine tip and apply minimal heat to avoid damaging the device.
   • Follow standard soldering practices to ensure reliable connections.

8. Testing:

   • After assembly, verify the output voltage at VOUT with a multimeter to ensure it is within the expected range (3.3V 卤 tolerance).
   • Check for any shorts or open circuits in the power supply and ground connections.

(For reference only)