Details

---

BUY NJM2360A https://www.utsource.net/itm/p/12606049.html

Below is the parameter table and instructions for the NJM2360A:

NJM2360A Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	Vcc	4.5	5.0	5.5	V
Quiescent Current	Iq	-	1.8	-	mA
Output Voltage Swing (Vcc = 5V)	Vosw	0.3	0.5	0.7	V
Input Bias Current	Ib	-	0.01	-	渭A
Input Offset Voltage	Vio	-	1.0	-	mV
Slew Rate	SR	-	1.0	-	V/渭s
Bandwidth	BW	-	1.0	-	MHz
Output Short-Circuit Protection	-	-	Yes	-	-
Operating Temperature Range	Toper	-40	-	85	掳C
Storage Temperature Range	Tstg	-65	-	150	掳C

Instructions for Using NJM2360A

1. Supply Voltage:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V.
   • Connect the positive supply to the Vcc pin and the negative supply to the GND pin.

2. Quiescent Current:

   • The quiescent current is typically 1.8mA. This value should be considered when designing the power supply circuit to ensure it can handle the current draw.

3. Output Voltage Swing:

   • The output voltage swing is typically 0.5V from the supply rails. For example, with a 5V supply, the output can swing from approximately 0.5V to 4.5V.

4. Input Bias Current:

   • The input bias current is very low, typically 0.01渭A. This ensures that the input signals do not significantly affect the operation of the circuit.

5. Input Offset Voltage:

   • The input offset voltage is typically 1.0mV. This should be taken into account when designing precision circuits.

6. Slew Rate:

   • The slew rate is typically 1.0V/渭s, which indicates the maximum rate at which the output voltage can change.

7. Bandwidth:

   • The bandwidth is typically 1.0MHz, which is suitable for most audio and general-purpose applications.

8. Output Short-Circuit Protection:

   • The NJM2360A has built-in output short-circuit protection. However, it is still important to design the circuit to avoid prolonged short circuits to prevent damage.

9. Operating Temperature Range:

   • The operating temperature range is from -40掳C to 85掳C. Ensure the device is used within this range to maintain reliable performance.

10. Storage Temperature Range:

    • The storage temperature range is from -65掳C to 150掳C. Store the device in a dry, cool place to ensure its longevity.

11. Handling:

    • Handle the NJM2360A with care to avoid static discharge, which can damage the device. Use proper ESD protection measures when handling the component.

12. Mounting:

    • Mount the NJM2360A on a PCB using standard surface mount technology (SMT) or through-hole mounting techniques, depending on the package type.

By following these parameters and instructions, you can ensure the optimal performance and reliability of the NJM2360A in your application.

(For reference only)