Details

---

BUY 74HCT132N https://www.utsource.net/itm/p/12606054.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	-	2.0	-	6.0	V
Input Low Voltage	VIL	IL = 1.0 mA	-	0.8	-	V
Input High Voltage	VIH	IH = -0.4 mA	-	2.0	-	V
Output Low Voltage	VOL	IL = 4.0 mA	-	0.4	0.5	V
Output High Voltage	VOH	IH = -0.4 mA	2.4	2.7	-	V
Propagation Delay Time	tpd	VCC = 5V, TA = 25掳C	-	10	18	ns
Power Dissipation	PD	Per Package	-	-	100	mW
Operating Temperature	TA	-	-40	-	85	掳C
Storage Temperature	TSTG	-	-65	-	150	掳C

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 6.0V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • For a low input (V_IL), the voltage should be less than 0.8V.
   • For a high input (V_IH), the voltage should be greater than 2.0V.

3. Output Signals:

   • The output will be low (V_OL) when the voltage is less than 0.5V.
   • The output will be high (V_OH) when the voltage is greater than 2.4V.

4. Propagation Delay:

   • The propagation delay time (t_pd) is typically 10ns at 5V supply voltage and 25掳C ambient temperature.

5. Power Dissipation:

   • The maximum power dissipation per package is 100mW. Ensure adequate heat sinking if operating near this limit.

6. Temperature Considerations:

   • The device operates within an ambient temperature range of -40掳C to 85掳C.
   • Store the device in temperatures between -65掳C and 150掳C.

7. Handling:

   • Handle the device with care to avoid static damage. Use proper ESD protection measures.

8. Layout and PCB Design:

   • Ensure proper layout and PCB design to minimize noise and interference. Use decoupling capacitors close to the power pins.

9. Testing:

   • Test the device under specified conditions to ensure reliable operation. Verify input and output levels and timing parameters.

10. Compliance:

    • Ensure compliance with relevant standards and regulations for your application.

(For reference only)