Details

---

BUY UPD7004C https://www.utsource.net/itm/p/12606073.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc		4.5	5.0	5.5	V
Output Voltage (High)	VOH	IOL = -100 渭A	2.4	2.7	3.0	V
Output Voltage (Low)	VOL	IOH = 1.6 mA	0.0	0.4	0.5	V
Input Voltage (High)	VIH		2.0	3.0	5.0	V
Input Voltage (Low)	VIL		0.0	0.8	1.5	V
Propagation Delay Time	tpD	Vcc = 5V, T = 25掳C	25	40	60	ns
Power Dissipation	PD			100		mW
Operating Temperature	Toper		-20		70	掳C
Storage Temperature	Tstg		-65		150	掳C

Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage is within the specified range (4.5V to 5.5V) to avoid damage to the device.

2. Output Voltage:

   • When the output is high, the voltage should be between 2.4V and 3.0V under a load current of -100 渭A.
   • When the output is low, the voltage should be between 0.0V and 0.5V under a load current of 1.6 mA.

3. Input Voltage:

   • For a logic high input, the voltage should be between 2.0V and 5.0V.
   • For a logic low input, the voltage should be between 0.0V and 1.5V.

4. Propagation Delay Time:

   • The propagation delay time is the time it takes for a change in input to result in a corresponding change in output. It should be between 25 ns and 60 ns at a supply voltage of 5V and an ambient temperature of 25掳C.

5. Power Dissipation:

   • The maximum power dissipation should not exceed 100 mW to ensure reliable operation.

6. Operating Temperature:

   • The device should operate within a temperature range of -20掳C to 70掳C.

7. Storage Temperature:

   • When not in use, store the device in an environment with a temperature range of -65掳C to 150掳C.

8. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Use appropriate ESD protection measures when handling or soldering the device.

9. Mounting and Soldering:

   • Follow recommended soldering profiles to avoid thermal stress on the device.
   • Ensure proper alignment and secure mounting to prevent mechanical stress.

10. Testing:

    • Test the device under the specified conditions to ensure it meets the performance parameters.
    • Use a reliable test setup to avoid false readings or damage to the device.

(For reference only)