Details

---

BUY sb5200 https://www.utsource.net/itm/p/12606081.html

Parameter	Description
Part Number	SB5200
Type	Schottky Barrier Diode
Maximum Reverse Voltage (VRRM)	50V
Maximum Forward Current (IF(AV))	2A
Peak Forward Surge Current (IFSM)	80A (10ms, sine half wave)
Forward Voltage (VF) at IF = 2A	0.45V (Max)
Reverse Recovery Time (trr)	35ns (Typical)
Junction Operating Temperature (TJ)	-65掳C to +175掳C
Storage Temperature (TSTG)	-65掳C to +175掳C
Package	TO-220AB
Mounting Type	Through-Hole

Instructions for Use

1. Handling Precautions:

   • Handle the diode with care to avoid mechanical damage.
   • Avoid exposure to high temperatures and humidity during storage.

2. Mounting:

   • Ensure proper heat sinking if operating near maximum current or power dissipation.
   • Use a thermal compound between the diode and heat sink for better thermal conductivity.
   • Soldering temperature should not exceed 260掳C for more than 10 seconds.

3. Electrical Connections:

   • Connect the cathode (K) to the positive side of the circuit and the anode (A) to the negative side.
   • Ensure that the reverse voltage across the diode does not exceed the maximum rated value (50V).

4. Thermal Management:

   • Monitor the junction temperature to ensure it remains within the specified range (-65掳C to +175掳C).
   • If operating in high ambient temperatures, consider additional cooling measures.

5. Surge Current:

   • The diode can handle peak forward surge currents up to 80A for short durations (10ms). Ensure that surge conditions do not exceed these limits.

6. Testing:

   • Test the diode using a multimeter or a diode tester to verify its functionality before installation.
   • Check for proper forward and reverse characteristics.

7. Storage:

   • Store the diodes in a dry, cool place away from direct sunlight and corrosive environments.
   • Follow recommended storage practices to maintain reliability.

8. Disposal:

   • Dispose of the diode according to local environmental regulations and guidelines for electronic components.

(For reference only)