Details

---

BUY S60SC6M https://www.utsource.net/itm/p/12606093.html

Parameter	Symbol	Value	Unit
Input Voltage	Vin	4.5 to 28	V
Output Voltage	Vout	3.3, 5, 12	V
Maximum Output Current	Iout	6	A
Efficiency	畏	Up to 92%	%
Operating Temperature	Toper	-40 to +85	掳C
Storage Temperature	Tstg	-55 to +125	掳C
No-Load Current	Iq	2.5	mA
Ripple and Noise	Vripple	<50	mVp-p
Protection Features		Overcurrent, Overvoltage, Short-Circuit

Instructions for Use

1. Input Connection:

   • Connect the input voltage (Vin) to the positive terminal and ground (GND) to the negative terminal.
   • Ensure the input voltage is within the specified range (4.5V to 28V).

2. Output Configuration:

   • Select the desired output voltage (3.3V, 5V, or 12V) by setting the appropriate jumper or using the configuration pins as specified in the datasheet.
   • Connect the load to the output terminals (Vout and GND).

3. Thermal Management:

   • Ensure adequate ventilation or cooling if operating at high currents to prevent overheating.
   • The device can operate efficiently up to 92%, but thermal management is crucial for maintaining performance.

4. Protection Features:

   • The S60SC6M includes overcurrent, overvoltage, and short-circuit protection.
   • In the event of a fault, the device will automatically shut down to protect itself and the connected circuit.

5. Storage and Handling:

   • Store the device in a dry environment within the storage temperature range (-55掳C to +125掳C).
   • Handle with care to avoid damage from static electricity or physical stress.

6. Testing and Troubleshooting:

   • Before connecting the load, verify the output voltage with a multimeter to ensure it matches the expected value.
   • If the device does not function as expected, check for proper connections, correct input voltage, and any signs of physical damage.

7. Compliance and Certification:

   • Ensure that the application complies with relevant safety and regulatory standards.
   • Refer to the datasheet for detailed compliance information and certifications.

(For reference only)