Details

---

BUY RD100HHF1C https://www.utsource.net/itm/p/12606103.html

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Input Voltage	VIN	4.5		28	V
Output Voltage	VOUT		1.2		V	Fixed output voltage
Operating Temperature	TOPR	-40		85	°C	Storage and operation
Load Current	ILOAD		3	5	A	Continuous operation
Efficiency	η		90		%	At nominal conditions
Dropout Voltage	VDROPOUT		0.6		V	At full load
Quiescent Current	IQ		50		μA	No load
Ripple Rejection	RRJ		70		dB	At 1 kHz
Thermal Resistance	θJA		40		°C/W	Junction to ambient

Instructions for RD100HHF1C

1. Installation:

   • Ensure the input voltage (VIN) is within the specified range of 4.5V to 28V.
   • Connect the input capacitor (typically 10μF ceramic) close to the input pin to minimize noise.

2. Output Configuration:

   • The device provides a fixed output voltage of 1.2V. No external components are required for setting the output voltage.

3. Thermal Considerations:

   • Place the device in an area with adequate airflow to ensure proper heat dissipation, especially under high load conditions.
   • If operating at or near the maximum load current, consider adding a heatsink to maintain junction temperature within limits.

4. Load Regulation:

   • The regulator can supply up to 5A continuously. For loads exceeding this, evaluate the thermal design carefully.

5. Efficiency Optimization:

   • To achieve the typical efficiency of 90%, operate the device under nominal conditions as specified in the datasheet.

6. Capacitor Selection:

   • Use low ESR capacitors on both input and output for optimal performance. Recommended values are provided in the application notes.

7. Protection Features:

   • The device includes internal protection features such as overcurrent and thermal shutdown. Ensure these do not activate during normal operation by adhering to the specified operating conditions.

8. Testing:

   • Before finalizing the design, test the circuit under various load conditions to ensure stability and performance meet requirements.

For detailed specifications and more complex applications, refer to the manufacturer’s datasheet and application notes.

(For reference only)