Details

---

BUY 25640AN https://www.utsource.net/itm/p/12606105.html

Parameter	Description	Value
Part Number	Full part number	25640AN
Type	Type of component	Inductor
Inductance	Inductance value	10 渭H
Tolerance	Tolerance of inductance	卤10%
DC Resistance (DCR)	DC resistance	0.03 惟
Saturation Current	Current at which inductance drops by 10%	1.8 A
Rated Current	Maximum continuous current	3.5 A
Operating Temperature	Temperature range for operation	-55掳C to +125掳C
Case Size	Physical dimensions of the component	10.0 x 10.0 mm
Height	Height of the component	5.0 mm
Termination	Type of termination	SMD
Shielding	Magnetic shielding	Shielded
Material	Core material	Ferrite
Package	Packaging type	Tape & Reel

Instructions for Use:

1. Mounting:

   • Ensure the PCB pad layout matches the footprint of the 25640AN.
   • Place the inductor on the PCB with the correct orientation.
   • Apply solder paste or flux to the pads.
   • Use a reflow soldering process or hand soldering with a fine tip iron.

2. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Avoid exposure to high humidity and corrosive environments.

3. Handling:

   • Handle with care to avoid mechanical damage.
   • Use ESD-safe tools and work surfaces to prevent static discharge.

4. Testing:

   • Measure the inductance using an LCR meter to ensure it meets the specified tolerance.
   • Check the DC resistance to ensure it is within the specified range.

5. Applications:

   • Suitable for use in power supplies, filters, and other circuits requiring high-frequency inductors.
   • Ideal for applications where low DCR and high saturation current are required.

6. Safety:

   • Ensure the inductor is not subjected to currents exceeding the rated current to avoid overheating and potential failure.
   • Follow all relevant safety guidelines and regulations when handling and installing the component.

(For reference only)