Details

---

BUY 74VHCT14PW https://www.utsource.net/itm/p/12606113.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	VCC	Operating Range	2.0	-	5.5	V
Input Low Voltage	VI(L)	VCC = 5.5V	-0.5	-	1.5	V
Input High Voltage	VI(H)	VCC = 5.5V	3.5	-	6.0	V
Output Low Voltage	VO(L)	IOL = 16 mA, VCC = 5.5V	-0.5	-	0.4	V
Output High Voltage	VO(H)	IOH = -4 mA, VCC = 5.5V	4.1	-	5.5	V
Input Leakage Current	II	VI = 0V or VCC	-	卤1	-	渭A
Output Leakage Current	IOZ	VI = 0V or VCC	-	卤50	-	nA
Propagation Delay Time	tpd	VCC = 5.5V, TA = 25掳C	-	4.8	-	ns
Power Dissipation	PD	VCC = 5.5V, TA = 25掳C	-	-	150	mW
Operating Temperature Range	Toper	-	-40	-	85	掳C
Storage Temperature Range	Tstg	-	-65	-	150	掳C

Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 2.0V to 5.5V.
   • Connect VCC to the positive power supply and GND to the ground.

2. Input Signals:

   • Apply input signals (VI) that meet the specified input low (VI(L)) and high (VI(H)) voltage levels.
   • Avoid exceeding the maximum input voltage to prevent damage to the device.

3. Output Signals:

   • The output signals (VO) will be driven to the specified output low (VO(L)) and high (VO(H)) voltage levels.
   • Ensure the load connected to the output can handle the specified current levels (IOL and IOH).

4. Leakage Current:

   • Be aware of the input and output leakage currents (II and IOZ) to ensure proper circuit design and minimize unwanted effects.

5. Timing:

   • Consider the propagation delay time (tpd) when designing circuits to ensure proper timing and synchronization.

6. Temperature:

   • Operate the device within the specified operating temperature range (Toper) to ensure reliable performance.
   • Store the device within the specified storage temperature range (Tstg) to prevent damage.

7. Power Dissipation:

   • Ensure the power dissipation (PD) does not exceed the maximum rating to avoid overheating and potential damage.

8. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

(For reference only)