Details

---

BUY FA5331 https://www.utsource.net/itm/p/12606121.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Supply Voltage	Vcc	Operating	4.5	5.0	5.5	V
Input Voltage	Vin	Operating	-0.3		Vcc+0.3	V
Output Voltage	Vout	No Load		3.3		V
Quiescent Current	IQ	Vcc = 5V, No Load		1.0		mA
Dropout Voltage	Vdo	Iout = 100mA		200		mV
Output Current	Iout	Dropout		150	300	mA

Instructions for FA5331

1. Power Supply Connection:

   • Connect the supply voltage (Vcc) between 4.5V and 5.5V to the Vcc pin.
   • Ensure a stable power supply to avoid fluctuations.

2. Input Protection:

   • The input voltage should not exceed Vcc + 0.3V or go below -0.3V to prevent damage to the device.

3. Output Configuration:

   • The output voltage is fixed at 3.3V under no load conditions. Ensure that the load does not pull the output voltage outside its operational range.

4. Quiescent Current:

   • At 5V supply voltage with no load, the quiescent current is typically 1.0mA. This value helps in calculating power consumption in low-power applications.

5. Dropout Voltage Consideration:

   • When the output current is 100mA, the dropout voltage is around 200mV. Design your circuit considering this to ensure efficient operation.

6. Output Current Limit:

   • The device can provide an output current up to 300mA. For currents above 150mA, monitor the temperature and ensure adequate heat dissipation.

7. Heat Dissipation:

   • For higher output currents, use appropriate heat sinks or cooling methods to maintain operating temperatures within safe limits.

8. Capacitor Requirements:

   • Use recommended capacitors on the input and output to stabilize the voltage and reduce ripple. Typically, a 1渭F ceramic capacitor on both input and output is sufficient.

9. PCB Layout:

   • Keep the PCB traces short and wide for power connections to minimize voltage drops and inductance effects. Place bypass capacitors close to the device pins.

(For reference only)