Details

---

BUY IGCM15F60GA/15A600V https://www.utsource.net/itm/p/12606136.html

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Rated Voltage	VBR(DSS)	ID = 250 渭A, Tj = 25掳C	-	600	-	V
Rated Current	ITSM	Tj = 25掳C, Non-repetitive	-	15	-	A
Continuous Forward Current	IF(AV)	TC = 40掳C, Rth(j-c) = 1.2 K/W	-	15	-	A
Peak Forward Surge Current	IFSM	tp = 8.3 ms, sinewave	-	100	-	A
Forward Voltage Drop	VF	IF = 15 A, Tj = 25掳C	1.5	1.7	2.0	V
Reverse Recovery Time	trr	IRM = 15 A, IF = 15 A, Tj = 25掳C	-	50	-	ns
Junction to Case Thermal Resistance	Rth(j-c)	-	-	1.2	-	K/W
Storage Temperature Range	Tstg	-	-55	-	150	掳C
Operating Junction Temperature	Tj(op)	-	-55	-	150	掳C

Instructions for Use:

1. Voltage Rating:

   • Ensure that the maximum voltage applied across the diode does not exceed 600V to prevent breakdown.

2. Current Rating:

   • The continuous forward current should not exceed 15A at a case temperature of 40掳C.
   • For non-repetitive conditions, the peak forward surge current can be up to 100A for a duration of 8.3 ms (sinewave).

3. Forward Voltage Drop:

   • The forward voltage drop is typically around 1.7V at 15A and 25掳C. Ensure that your circuit can handle this voltage drop.

4. Reverse Recovery Time:

   • The reverse recovery time is approximately 50ns. This is important for high-frequency applications to avoid excessive power dissipation.

5. Thermal Management:

   • The junction-to-case thermal resistance is 1.2 K/W. Proper heat sinking is necessary to maintain the operating junction temperature within the safe range of -55掳C to 150掳C.

6. Storage and Operating Temperature:

   • Store the diode in a temperature range of -55掳C to 150掳C.
   • The operating junction temperature should also be kept within this range to ensure reliable performance.

7. Handling and Mounting:

   • Handle the diode with care to avoid mechanical damage.
   • Follow standard soldering and mounting procedures to ensure proper electrical and thermal connections.

8. Testing:

   • Before using the diode in a critical application, perform thorough testing under expected operating conditions to verify performance and reliability.

9. Compliance:

   • Ensure that the diode complies with all relevant safety and regulatory standards for your specific application.

(For reference only)