Details

---

BUY HD14040BP https://www.utsource.net/itm/p/12606142.html

Below is the parameter table and instructions for the HD14040BP:

Parameter Table

Parameter	Symbol	Conditions	Min	Typical	Max	Unit
Supply Voltage	VCC	-	4.5	-	5.5	V
Output Current (High)	IOH	VCC = 5V, VOL = 0.4V	-	2.6	3.2	mA
Output Current (Low)	IOL	VCC = 5V, VOH = 2.4V	-	8.0	10.0	mA
Input Voltage (High)	VIH	-	2.0	-	5.5	V
Input Voltage (Low)	VIL	-	0.0	-	0.8	V
Propagation Delay Time	tpd	VCC = 5V, VI = 0 to 5V, VO = 0 to 5V	-	12	18	ns
Power Dissipation	PD	-	-	-	100	mW
Operating Temperature	TA	-	-40	-	85	掳C
Storage Temperature	TSTG	-	-65	-	150	掳C

Instructions

1. Supply Voltage:

   • Ensure the supply voltage (V_CC) is within the range of 4.5V to 5.5V. The typical operating voltage is 5V.

2. Output Current:

   • When the output is high (V_OH), the maximum current it can source is 3.2mA.
   • When the output is low (V_OL), the maximum current it can sink is 10.0mA.

3. Input Voltage:

   • For a valid high input (V_IH), the voltage should be between 2.0V and 5.5V.
   • For a valid low input (V_IL), the voltage should be between 0.0V and 0.8V.

4. Propagation Delay Time:

   • The propagation delay time (t_pd) is the time it takes for the output to change state after the input changes. It typically ranges from 12ns to 18ns at 5V supply voltage.

5. Power Dissipation:

   • The maximum power dissipation (P_D) is 100mW. Ensure that the device does not exceed this limit to avoid overheating and potential damage.

6. Operating Temperature:

   • The device is designed to operate within a temperature range of -40掳C to 85掳C.

7. Storage Temperature:

   • When not in use, store the device in an environment with a temperature range of -65掳C to 150掳C.

8. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Use proper grounding techniques when handling and testing the device.

9. Mounting and Soldering:

   • Follow standard surface mount technology (SMT) guidelines for mounting and soldering the device.
   • Ensure that the soldering temperature and duration do not exceed the recommended limits to prevent damage.

By following these parameters and instructions, you can ensure the reliable operation and longevity of the HD14040BP.

(For reference only)