Details

---

BUY BTS441RG https://www.utsource.net/itm/p/12606148.html

Parameter	Symbol	Test Conditions	Min	Typ	Max	Unit
Continuous Drain Current	ID	Tc = 25掳C	-	80	-	A
Continuous Drain Current	ID	Tc = 70掳C	-	45	-	A
Peak Pulse Drain Current	Ipd	tp = 10 ms, Tc = 25掳C	-	160	-	A
Gate-Source Voltage	VGS	-	-18	0	18	V
Drain-Source Breakdown Voltage	BVdss	IG = 0, ID = 250 渭A	45	-	50	V
Rds(on) at 25掳C	RDS(on)	VGS = 10V, ID = 80A	-	3.5	-	m惟
Rds(on) at 125掳C	RDS(on)	VGS = 10V, ID = 80A	-	5.5	-	m惟
Gate Charge	Qg	VGS = 10V, ID = 80A	-	120	-	nC
Input Capacitance	Cin	VGS = 0V, f = 1 MHz	-	2200	-	pF
Output Capacitance	Coss	VDS = 25V, f = 1 MHz	-	450	-	pF
Reverse Transfer Capacitance	Crss	VDS = 25V, f = 1 MHz	-	180	-	pF
Thermal Resistance Junction to Case	RthJC	-	-	0.6	-	K/W
Thermal Resistance Junction to Ambient	RthJA	-	-	40	-	K/W

Instructions for Use:

1. Handling Precautions:

   • The BTS441RG is sensitive to electrostatic discharge (ESD). Use proper ESD protection when handling the device.
   • Avoid exposing the device to excessive heat or mechanical stress.

2. Mounting:

   • Ensure that the mounting surface is clean and flat to ensure good thermal contact.
   • Use a thermal interface material (TIM) such as thermal paste or a thermal pad to improve heat dissipation.

3. Operating Conditions:

   • Do not exceed the maximum ratings listed in the table to avoid damaging the device.
   • Ensure adequate cooling to maintain the junction temperature within safe limits, especially under high current conditions.

4. Gate Drive:

   • Apply a gate-source voltage (VGS) within the specified range to turn the device on and off.
   • Use a gate resistor to limit the gate current and prevent ringing during switching transitions.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect against ESD.

6. Testing:

   • When testing the device, use appropriate test equipment and follow safety guidelines to avoid damage to the device or injury.

7. Applications:

   • The BTS441RG is suitable for high-current applications such as motor control, battery management, and power supplies.
   • Ensure that the application circuitry provides adequate protection against overvoltage, overcurrent, and thermal runaway.

(For reference only)