Details

---

BUY FFPF30U20STU https://www.utsource.net/itm/p/12606166.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Forward Voltage	VF	-	0.7	1.0	V	@ IF = 5 A, TA = 25掳C
Reverse Blocking Voltage	VR	200	-	-	V	@ IR = 1 渭A, TA = 25掳C
Continuous Forward Current	IF	-	30	30	A	@ TC = 25掳C
Peak Forward Surge Current	IFSM	-	-	300	A	8.3 ms single pulse, TA = 25掳C
Reverse Leakage Current	IR	-	-	10	渭A	@ VR = 200 V, TA = 25掳C
Junction Capacitance	CJ	-	40	60	pF	@ VR = 0 V, f = 1 MHz
Operating Temperature Range	TOP	-55	-	175	掳C	-
Storage Temperature Range	TSTG	-55	-	150	掳C	-

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified range.
   • Use recommended mounting torque for screw terminals to avoid damage.

2. Electrical Handling:

   • Do not exceed the maximum ratings for forward current, reverse voltage, and power dissipation.
   • Ensure that the peak forward surge current is not exceeded during transient conditions.

3. Thermal Management:

   • The device should be mounted on a heatsink with sufficient thermal conductivity to dissipate the generated heat.
   • Monitor the junction temperature to ensure it does not exceed 175掳C.

4. Environmental Considerations:

   • Store the device in a dry environment to prevent moisture damage.
   • Avoid exposure to corrosive gases and environments with high humidity.

5. Testing:

   • Perform regular testing to ensure the device is operating within its specified parameters.
   • Use appropriate test equipment and methods to avoid damaging the device during testing.

6. Handling:

   • Handle the device with care to avoid mechanical stress or damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

7. Soldering:

   • Use a controlled soldering process to avoid overheating the device.
   • Ensure the soldering iron is set to the correct temperature and duration as specified by the manufacturer.

8. Compliance:

   • Ensure that the device complies with all relevant safety and regulatory standards for your application.

(For reference only)