Details

---

BUY TL604CPSR https://www.utsource.net/itm/p/12606169.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Input Voltage	VIN	1.8	-	5.5	V	Operating input voltage range
Output Voltage	VOUT	1.2	-	3.3	V	Adjustable output voltage
Output Current	IOUT	-	400	600	mA	Maximum continuous output current
Quiescent Current	IQ	-	25	40	渭A	Quiescent current at no load
Dropout Voltage	VDO	-	120	180	mV	Dropout voltage at maximum load
Load Regulation	-	-	0.2	0.5	%	Change in output voltage with load
Line Regulation	-	-	0.1	0.3	%/V	Change in output voltage with input voltage
PSRR (Power Supply Rejection Ratio)	-	-	70	80	dB	Power supply rejection ratio at 1 kHz
Operating Temperature	TOP	-40	-	125	掳C	Operating ambient temperature range
Storage Temperature	TSTG	-65	-	150	掳C	Storage temperature range

Instructions for Use

1. Input Voltage (V_IN):

   • Ensure the input voltage is within the specified range of 1.8V to 5.5V to avoid damage or improper operation.

2. Output Voltage (V_OUT):

   • The output voltage can be adjusted using external resistors. Refer to the datasheet for the specific resistor values required for the desired output voltage.

3. Output Current (I_OUT):

   • The device can provide up to 600mA of continuous output current. For higher currents, ensure proper heat dissipation and consider additional cooling measures.

4. Quiescent Current (I_Q):

   • The quiescent current is typically 25渭A at no load, which helps in minimizing power consumption in low-power applications.

5. Dropout Voltage (V_DO):

   • The dropout voltage is the minimum difference between the input and output voltages required to maintain regulation. It is typically 120mV to 180mV at maximum load.

6. Load Regulation:

   • The change in output voltage due to load variations is minimal, typically 0.2% to 0.5%.

7. Line Regulation:

   • The change in output voltage due to input voltage variations is also minimal, typically 0.1% to 0.3% per volt.

8. PSRR (Power Supply Rejection Ratio):

   • The device has a high PSRR of 70dB to 80dB at 1kHz, effectively rejecting noise from the input supply.

9. Operating Temperature (T_OP):

   • The device is designed to operate in ambient temperatures ranging from -40掳C to 125掳C. Ensure adequate thermal management to keep the device within this range.

10. Storage Temperature (T_STG):

    • The device can be stored in temperatures ranging from -65掳C to 150掳C without damage.

Additional Notes:

• Always refer to the specific application notes and datasheets for detailed information and recommended circuit designs.
• Proper PCB layout and component selection are crucial for optimal performance and reliability.

(For reference only)