Details

---

BUY GAL16V8B-15LP https://www.utsource.net/itm/p/12606171.html

Parameter	Description	Value
Package Type	The type of package used for the device	PLCC-20
Operating Voltage (Vcc)	The range of supply voltage that the device can operate under	4.5V to 5.5V
Output Current per Pin	Maximum current that can be sourced or sunk by each output pin	25mA
Propagation Delay Time	Time delay between input change and corresponding output change	15ns (max)
Power Dissipation	Maximum power dissipation for the device	350mW
Operating Temperature	Range of temperatures over which the device is guaranteed to operate	-40掳C to 85掳C
Storage Temperature	Range of temperatures over which the device can be stored without damage	-65掳C to 150掳C
Input Leakage Current	Maximum current that flows into an input pin when it is not driven	卤1渭A
Output Leakage Current	Maximum current that flows out of an output pin when it is not driven	卤100渭A
Standby Current	Current consumed by the device when all inputs are held at valid logic levels	50渭A (max)
Programming Voltage	Voltage required to program the device	12.0V 卤 0.5V
Programming Current	Maximum current required during programming	10mA
Erase Time	Time required to erase the device	10ms (max)
Program Cycle Time	Time required to complete a programming cycle	10ms (max)

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the specified range of 4.5V to 5.5V.
   • Connect the ground (GND) pin to a stable reference ground.

2. Input Handling:

   • Apply valid logic levels to all input pins. Avoid floating inputs as they can cause undefined behavior.
   • Input leakage current should be within 卤1渭A to prevent unintended operation.

3. Output Handling:

   • Do not exceed the maximum output current of 25mA per pin.
   • Ensure the total power dissipation does not exceed 350mW to avoid overheating.

4. Programming:

   • Use a compatible programmer to apply the programming voltage (12.0V 卤 0.5V).
   • The programming current should not exceed 10mA.
   • Programming and erasing times are both 10ms (max).

5. Temperature Considerations:

   • Operate the device within the temperature range of -40掳C to 85掳C.
   • Store the device within the temperature range of -65掳C to 150掳C.

6. Standby Mode:

   • When the device is not in use, ensure all inputs are held at valid logic levels to minimize standby current (50渭A max).

7. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the sensitive components.
   • Follow proper soldering techniques to ensure reliable connections and avoid thermal stress.

(For reference only)