Details

---

BUY R3BMF5-1 https://www.utsource.net/itm/p/12606178.html

Parameter	Value	Description
Part Number	R3BMF5-1	-
Type	Relay	Single Pole, Double Throw (SPDT)
Coil Voltage	24V DC	Operating voltage for the coil
Coil Current	10mA	Current required to energize the coil
Contact Form	SPDT	Single Pole, Double Throw
Contact Rating	10A @ 250V AC	Maximum current and voltage
Contact Resistance	50m惟 max	Resistance between contacts when closed
Insulation Resistance	100M惟 min @ 500VDC	Resistance between contacts and coil
Dielectric Strength	1000VAC @ 60Hz for 1 minute	Voltage withstand capability
Operating Temperature	-40掳C to +85掳C	Temperature range for operation
Storage Temperature	-40掳C to +125掳C	Temperature range for storage
Mechanical Life	10 million operations	Expected life under no load
Electrical Life	100,000 operations	Expected life under rated load
Weight	15g	Weight of the relay

Instructions:

1. Installation:

   • Ensure the relay is mounted on a flat, stable surface.
   • Use the provided mounting holes or clips for secure attachment.

2. Wiring:

   • Connect the coil terminals to the appropriate control circuit using the specified coil voltage.
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts to the load and power supply as required.

3. Operation:

   • When the coil is energized, the common contact will switch from the NC to the NO position.
   • When the coil is de-energized, the common contact will return to the NC position.

4. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay contacts with a dry, lint-free cloth if necessary.

5. Safety:

   • Do not exceed the maximum ratings for voltage, current, or temperature.
   • Ensure the relay is disconnected from the power source before performing any maintenance or testing.

6. Storage:

   • Store the relay in a dry, cool place away from direct sunlight and extreme temperatures.

(For reference only)