Details

---

BUY SE078 https://www.utsource.net/itm/p/12606179.html

Parameter	Description	Value
Part Number	SE078
Type	Electronic Component
Function	High-Frequency Transformer
Primary Winding	Number of Turns	78
Secondary Winding	Number of Turns	156
Core Material	Ferrite
Operating Frequency	Range	50 kHz - 1 MHz
Insulation Voltage	Primary to Secondary	2 kV
Temperature Range	Operating	-40掳C to 125掳C
Mounting Type	Through-Hole
Dimensions	Length x Width x Height	25 mm x 15 mm x 10 mm
Weight		10 g
Compliance	RoHS, REACH

Instructions for Use

1. Handling and Storage:

   • Store the SE078 in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

2. Mounting:

   • Ensure that the transformer is securely mounted on the PCB to prevent vibration and movement.
   • Use appropriate soldering techniques to avoid overheating the component.

3. Wiring:

   • Connect the primary winding to the input power source.
   • Connect the secondary winding to the load or output circuit.
   • Verify the polarity of the windings to ensure correct operation.

4. Testing:

   • Before applying power, check all connections for continuity and correct wiring.
   • Test the transformer under no-load conditions to verify the output voltage.
   • Gradually increase the load to the rated capacity while monitoring temperature and performance.

5. Safety:

   • Ensure that the insulation voltage ratings are not exceeded.
   • Use appropriate safety equipment when working with high voltages.
   • Follow all relevant electrical safety guidelines and regulations.

6. Maintenance:

   • Regularly inspect the transformer for signs of wear or damage.
   • Clean the transformer with a soft, dry cloth if necessary.
   • Replace the transformer if it shows any signs of failure or malfunction.

(For reference only)