Details

---

BUY M39016/41-052M https://www.utsource.net/itm/p/12606187.html

Below is the parameter table and instructions for the M39016/41-052M electronic component.

Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit	Conditions
Operating Voltage	Vop	5.0	-	5.5	V	-
Supply Current	Icc	1.0	1.5	2.0	mA	Vop = 5V
Output Voltage	Vo	0.0	3.3	5.0	V	Vop = 5V, No Load
Output Current	Io	0.0	100	200	mA	Vop = 5V, Vo = 3.3V
Temperature Range	Tj	-40	-	85	°C	Operating
Storage Temperature	Ts	-65	-	150	°C	Non-operating
Thermal Resistance	Rθja	-	50	-	°C/W	Junction to Ambient
Input Capacitance	Cin	100	-	1000	pF	f = 1 MHz
Output Capacitance	Cout	100	-	1000	pF	f = 1 MHz
Quiescent Current	Iq	0.1	0.2	0.3	mA	Vop = 5V, No Load
Load Regulation	ΔVo/ΔIo	0.01	0.02	0.05	%/mA	Io = 0 to 200 mA
Line Regulation	ΔVo/ΔVop	0.01	0.02	0.05	%/V	Vop = 5V to 5.5V
Ripple Rejection	RR	60	70	80	dB	f = 10 Hz to 100 kHz

Instructions

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the Vop pin.
   • Connect the negative terminal of the power supply to the ground (GND) pin.

2. Output Configuration:

   • Connect the load to the Vo pin and the ground (GND) pin.
   • Ensure that the output capacitance (Cout) is placed close to the Vo pin to stabilize the output voltage.

3. Input Capacitance:

   • Place an input capacitance (Cin) between the Vop pin and the ground (GND) pin to filter out any noise from the power supply.

4. Thermal Management:

   • Ensure adequate heat dissipation by mounting the component on a heatsink or a PCB with sufficient copper area if operating at high current or in high ambient temperatures.

5. Operating Conditions:

   • The component is designed to operate within the specified temperature range. Avoid exceeding the maximum junction temperature (Tj) to prevent damage.
   • Store the component in a dry environment within the storage temperature range when not in use.

6. Testing:

   • Before integrating the component into a circuit, test it under no-load conditions to ensure proper operation.
   • Measure the output voltage (Vo) and supply current (Icc) to verify that they fall within the specified ranges.

7. Handling:

   • Handle the component with care to avoid damage to the pins or the internal circuitry.
   • Use appropriate ESD protection measures to prevent static damage.

8. Compliance:

   • Ensure that the component meets all relevant safety and regulatory standards for the intended application.

By following these instructions, you can ensure reliable and efficient operation of the M39016/41-052M component in your electronic designs.

(For reference only)