Details

---

BUY YG225C2 https://www.utsource.net/itm/p/12606188.html

Below is the parameter table and instructions for the YG225C2 component.

Parameter Table

Parameter	Symbol	Min	Typical	Max	Unit
Operating Voltage	VCC	4.75	5.0	5.25	V
Output Current	IOUT	-	200	300	mA
Quiescent Current	IQ	-	10	15	渭A
Dropout Voltage	VDO	-	0.3	0.6	V
Thermal Shutdown	TSD	-	150	-	掳C
Operating Temperature	TA	-40	-	85	掳C
Storage Temperature	TSTG	-65	-	150	掳C
Junction Temperature	TJ	-	-	150	掳C

Instructions

1. Power Supply Connection:

   • Connect the positive terminal of the power supply to the V_IN pin.
   • Connect the negative terminal of the power supply to the GND pin.

2. Output Connection:

   • Connect the load or circuit requiring regulated voltage to the V_OUT pin.
   • Ensure that the load current does not exceed the maximum output current (300 mA).

3. Capacitors:

   • Place a 10 渭F electrolytic capacitor between V_IN and GND to filter input noise.
   • Place a 10 渭F electrolytic capacitor between V_OUT and GND to stabilize the output voltage.

4. Thermal Considerations:

   • Ensure adequate heat dissipation if the component is operating at high currents or in high ambient temperatures.
   • Use a heatsink if necessary to keep the junction temperature below 150掳C.

5. Thermal Shutdown:

   • The component will automatically shut down if the junction temperature exceeds 150掳C to prevent damage.
   • Allow the component to cool down before resuming operation.

6. Storage:

   • Store the component in a dry environment with temperatures between -65掳C and 150掳C.

7. Handling:

   • Handle the component with care to avoid damage to the pins or the internal circuitry.
   • Use appropriate ESD protection when handling the component.

By following these instructions, you can ensure optimal performance and longevity of the YG225C2 component.

(For reference only)