Details

---

BUY 20J341 https://www.utsource.net/itm/p/12606203.html

Parameter	Symbol	Min	Typical	Max	Unit
Supply Voltage	Vcc	4.5	-	5.5	V
Operating Current	Iop	-	10	-	mA
Maximum Output Current	Iout	-	100	-	mA
Output Voltage	Vout	-	3.3	-	V
Quiescent Current	Iq	-	1	-	mA
Dropout Voltage	Vdo	-	0.3	-	V
Operating Temperature	Toper	-40	-	85	掳C
Storage Temperature	Tstg	-65	-	150	掳C

Instructions for Using 20J341:

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Operating Current (Iop):

   • The typical operating current is 10mA. Ensure your application does not exceed this value to maintain optimal performance.

3. Maximum Output Current (Iout):

   • The maximum output current is 100mA. Do not exceed this limit to prevent overheating or damage.

4. Output Voltage (Vout):

   • The typical output voltage is 3.3V. This is suitable for powering low-voltage digital circuits.

5. Quiescent Current (Iq):

   • The quiescent current is typically 1mA. This is the current consumed by the device when no load is connected.

6. Dropout Voltage (Vdo):

   • The typical dropout voltage is 0.3V. This is the minimum difference between the input and output voltages required for the regulator to function properly.

7. Operating Temperature (Toper):

   • The device can operate within a temperature range of -40掳C to 85掳C. Ensure the ambient temperature stays within these limits to avoid performance degradation or failure.

8. Storage Temperature (Tstg):

   • The device can be stored in temperatures ranging from -65掳C to 150掳C. However, ensure it is brought to operating temperature before use.

9. Mounting and Handling:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow proper soldering techniques to ensure reliable connections and avoid thermal shock.

10. Application Notes:

    • Use appropriate capacitors on the input and output sides to stabilize the voltage and filter out noise.
    • Ensure adequate heat dissipation if the device will be operating near its maximum current ratings.

(For reference only)