Details

---

BUY MBQ60T65PESTH https://www.utsource.net/itm/p/12606209.html

Parameter	Description	Value	Unit
Part Number	Full Part Number	MBQ60T65PESTH	-
Type	Component Type	MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor)	-
Package	Package Type	TO-220-3L	-
Polarity	Polarity	N-Channel	-
VDSS	Drain-to-Source Voltage	650	V
RDS(on)	On-State Resistance at 10V VGS	60	m惟
ID	Continuous Drain Current	28	A
PTOT	Total Power Dissipation	117	W
TJ	Junction Temperature Range	-55 to 150	掳C
TSTG	Storage Temperature Range	-55 to 150	掳C
QG	Gate Charge	130	nC
QGD	Gate-to-Drain Charge	35	nC
fT	Transition Frequency	4.8	MHz
VGS(th)	Gate Threshold Voltage	2.0 to 4.0	V
Eoss	Output Capacitance Energy	14	渭J

Instructions for Use:

1. Mounting and Handling:

   • Ensure that the device is handled with care to avoid damage to the leads or the body.
   • Use appropriate heat sinks to manage thermal dissipation, especially when operating at high power levels.

2. Electrical Connections:

   • Connect the drain (D), source (S), and gate (G) terminals as per the circuit diagram.
   • Ensure that the gate voltage (V_GS) does not exceed the maximum rated value to prevent damage to the device.

3. Thermal Management:

   • The junction temperature (T_J) should be kept within the specified range to ensure reliable operation.
   • Use thermal paste between the heat sink and the device to improve thermal conductivity.

4. Storage:

   • Store the device in a dry, cool environment within the specified storage temperature range.
   • Avoid exposure to high humidity and corrosive environments.

5. Testing:

   • Before installation, test the device using a multimeter or a dedicated MOSFET tester to ensure it meets the specified parameters.
   • Perform functional tests under controlled conditions to validate performance.

6. Safety Precautions:

   • Always use proper ESD (Electrostatic Discharge) protection when handling the device to prevent damage.
   • Follow all relevant safety guidelines and regulations when working with high voltages and currents.

(For reference only)