Details

---

BUY ACS725LLCTR-20AB-T https://www.utsource.net/itm/p/12606233.html

Below is the parameter table and instructions for the ACS725LLCTR-20AB-T, a current sensor IC from Allegro MicroSystems.

ACS725LLCTR-20AB-T Parameter Table

Parameter	Symbol	Min	Typ	Max	Unit
Supply Voltage	VCC	4.5	5.0	5.5	V
Output Quiescent Voltage	VQ	2.4	2.5	2.6	V
Full-Scale Current Range	IFS	-20	卤20	20	A
Sensitivity	S	100	133	167	mV/A
Bandwidth	fBW	-	120	-	kHz
Response Time	tR	-	1.5	-	渭s
Output Noise	VN	-	2.5	-	mVrms
Operating Temperature Range	TA	-40	-	150	掳C
Storage Temperature Range	TSTG	-65	-	150	掳C
Thermal Resistance (胃JA)	-	-	50	-	掳C/W

Instructions for Use

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the specified range of 4.5V to 5.5V.
   • Connect the ground (GND) pin to a stable ground reference.

2. Current Sensing:

   • Place the current-carrying conductor through the center hole of the sensor.
   • The current should flow in the direction indicated by the arrow on the top of the package.

3. Output Signal:

   • The output voltage (V_OUT) is proportional to the sensed current.
   • The output quiescent voltage (V_Q) is typically 2.5V when no current is flowing.
   • For positive currents, the output voltage increases above V_Q.
   • For negative currents, the output voltage decreases below V_Q.

4. Sensitivity Calculation:

   • The sensitivity (S) is typically 133 mV/A.
   • To calculate the output voltage for a given current (I): [ V_{text} = V_{text} + S times I ]
   • For example, if I = 10A: [ V_{text} = 2.5V + 133 text{ mV/A} times 10 text = 2.5V + 1.33V = 3.83V ]

5. Temperature Considerations:

   • Ensure the operating temperature (T_A) remains within the range of -40掳C to 150掳C.
   • The storage temperature (T_STG) can range from -65掳C to 150掳C.

6. Thermal Management:

   • The thermal resistance (胃_JA) is 50掳C/W.
   • Ensure adequate heat dissipation to prevent overheating, especially under high current conditions.

7. Noise Reduction:

   • The output noise (V_N) is typically 2.5 mV_rms.
   • Use appropriate filtering techniques if low-noise performance is critical.

8. Handling Precautions:

   • Handle the device with care to avoid damage.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

By following these parameters and instructions, you can ensure optimal performance and reliability of the ACS725LLCTR-20AB-T current sensor IC.

(For reference only)