Details

---

BUY SDURD560A https://www.utsource.net/itm/p/12606240.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VIN	Operating range	2.7	-	5.5	V
Output Voltage	VOUT	Fixed output	-	3.3	-	V
Output Current	IOUT	Continuous	-	500	-	mA
Quiescent Current	IQ	No load	-	10	-	渭A
Dropout Voltage	VDROPOUT	IOUT = 300mA	-	250	-	mV
PSRR (Power Supply Rejection Ratio) at 1kHz	PSRR	VIN = 3.3V, IOUT = 10mA	-	65	-	dB
Load Regulation		IOUT from 0 to 300mA	-	0.5	-	%
Line Regulation		VIN from 2.7V to 5.5V	-	0.1	-	%

Instructions:

1. Installation: Ensure the SDURD560A is placed correctly on the PCB with proper alignment of pins.
2. Input Voltage: Connect the input voltage within the specified operating range (2.7V to 5.5V).
3. Output Capacitor: Use a minimum of 1渭F ceramic capacitor at the output for stability.
4. Heat Management: For applications requiring higher output currents, ensure adequate heat dissipation or use a heatsink.
5. Bypass Capacitors: Place bypass capacitors close to the input and output terminals to minimize noise and improve transient response.
6. PCB Layout: Follow recommended PCB layout guidelines to optimize performance and reliability.
7. Testing: After installation, test the regulator under various conditions to ensure it meets the design specifications.

(For reference only)