Details

---

BUY VS-40EPS12PBF https://www.utsource.net/itm/p/12606244.html

Parameter	Description	Value
Part Number	Full Part Number	VS-40EPS12PBF
Type	Device Type	Voltage Regulator
Input Voltage (VIN)	Minimum Input Voltage	6V
	Maximum Input Voltage	40V
Output Voltage (VOUT)	Fixed Output Voltage	12V
Output Current (IOUT)	Continuous Output Current	1A
Operating Temperature	Minimum Operating Temperature	-40掳C
	Maximum Operating Temperature	+85掳C
Storage Temperature	Minimum Storage Temperature	-65掳C
	Maximum Storage Temperature	+150掳C
Package	Package Type	TO-220
Pin Configuration	Pin 1	Input (VIN)
	Pin 2	Ground (GND)
	Pin 3	Output (VOUT)
Efficiency	Typical Efficiency at 1A	85%
Ripple and Noise	Output Ripple and Noise	40mV (Peak-to-Peak)
Thermal Resistance	Junction to Ambient (胃JA)	65掳C/W
Protection Features	Overvoltage Protection	Yes
	Overcurrent Protection	Yes
	Thermal Shutdown	Yes

Instructions for Use:

1. Mounting:

   • Ensure the device is mounted on a heatsink if operating at or near maximum output current to maintain thermal performance.
   • Use a thermal compound between the device and the heatsink to improve heat transfer.

2. Power Supply:

   • Connect the input voltage (VIN) to Pin 1.
   • Connect the ground (GND) to Pin 2.
   • Connect the load to the output voltage (VOUT) on Pin 3.

3. Input Filtering:

   • Place a 10渭F electrolytic capacitor close to the input pin to filter out noise and stabilize the input voltage.

4. Output Filtering:

   • Place a 10渭F electrolytic capacitor close to the output pin to reduce ripple and noise.

5. Protection:

   • The device includes overvoltage, overcurrent, and thermal protection. However, it is recommended to monitor the operating conditions to prevent damage.

6. Storage:

   • Store the device in a dry, cool environment to avoid moisture damage.

7. Handling:

   • Handle the device with care to avoid mechanical stress and damage to the pins.

8. Testing:

   • Before connecting the device to the final application, test it with a known load to ensure proper operation.

9. Compliance:

   • Ensure that the device meets all relevant safety and regulatory standards for your application.

(For reference only)