Details

---

BUY SLC2012M https://www.utsource.net/itm/p/12606250.html

Parameter	Description	Value
Part Number	Component Identifier	SLC2012M
Type	Component Type	Surface Mount Capacitor
Capacitance	Capacitance Value	100 pF to 10 渭F (varies by specific model)
Voltage Rating	Maximum DC Voltage	50 V, 100 V, 200 V (varies by specific model)
Tolerance	Capacitance Tolerance	卤5%, 卤10% (varies by specific model)
Temperature Coefficient	Change in capacitance with temperature	X7R, NPO (varies by specific model)
Operating Temperature Range	Temperature range for operation	-55掳C to +125掳C
Package Size	Physical dimensions	2.0 x 1.25 mm (L x W)
Termination	Connection method	Solderable nickel barrier terminations
RoHS Compliance	Environmental compliance	Yes
Lead-Free	Lead content in solder	Yes
Insulation Resistance	Resistance to leakage current	>10 G惟 at 25掳C
Dissipation Factor	Energy loss as heat	<0.1% at 1 kHz, 20掳C
ESR (Equivalent Series Resistance)	Resistance in series with the capacitor	<0.05 惟 at 1 kHz, 20掳C
ESL (Equivalent Series Inductance)	Inductance in series with the capacitor	<0.5 nH

Instructions for Use

1. Handling and Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical damage.

2. Soldering:

   • Preheat the PCB to 100掳C to 120掳C before soldering.
   • Use a soldering iron with a temperature of 350掳C to 380掳C.
   • Soldering time should not exceed 3 seconds per terminal.
   • Allow the component to cool naturally after soldering.

3. Mounting:

   • Place the capacitor on the PCB with the correct orientation (if applicable).
   • Ensure that the component is securely attached to the PCB without any gaps.

4. Testing:

   • After soldering, test the circuit to ensure proper functionality.
   • Measure the capacitance and voltage rating to confirm they meet the specified values.

5. Environmental Considerations:

   • Avoid exposure to corrosive gases and high humidity environments.
   • Ensure the operating temperature remains within the specified range to prevent damage.

6. Disposal:

   • Dispose of the component according to local environmental regulations.
   • Do not incinerate or dispose of in a landfill.

For more detailed information, refer to the datasheet provided by the manufacturer.

(For reference only)