Details

---

BUY TB2931HQ https://www.utsource.net/itm/p/12606251.html

Parameter	Description	Value	Unit
Part Number	Device Identifier	TB2931HQ	-
Type	Device Type	MOSFET	-
VDS (Max)	Drain-Source Voltage	600	V
VGS (Max)	Gate-Source Voltage	卤20	V
ID (Max)	Continuous Drain Current	15	A
PD (Max)	Power Dissipation	180	W
RDS(on) (Max)	On-State Resistance at VGS = 10V	0.045	惟
TJ (Max)	Junction Temperature	175	掳C
TSTG	Storage Temperature Range	-55 to 150	掳C
Package	Package Type	TO-220	-
Mounting Type	Mounting Style	Through-Hole	-

Instructions for Use:

1. Handling Precautions:

   • Handle the device with care to avoid mechanical damage.
   • Avoid touching the leads or the body of the device directly; use proper handling tools.
   • Ensure that the device is not exposed to excessive static electricity, which can damage the internal structure.

2. Mounting:

   • Ensure that the PCB and mounting surfaces are clean and free from contaminants.
   • Apply thermal paste between the heat sink and the device for optimal heat dissipation.
   • Secure the device using appropriate fasteners to ensure good thermal contact and mechanical stability.

3. Electrical Connections:

   • Connect the drain, source, and gate terminals as per the circuit diagram.
   • Use short, thick wires for connections to minimize inductance and resistance.
   • Ensure that the gate-source voltage does not exceed the maximum rating to prevent damage to the device.

4. Thermal Management:

   • Ensure that the device is properly heatsinked to maintain the junction temperature within safe limits.
   • Monitor the temperature of the device during operation and adjust the cooling solution if necessary.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight and sources of heat.
   • Keep the device in its original packaging until ready for use to protect it from moisture and static discharge.

6. Testing:

   • Before installing the device in a circuit, perform a visual inspection to ensure there are no physical defects.
   • Test the device using a multimeter or other appropriate testing equipment to verify its functionality.

7. Disposal:

   • Dispose of the device according to local environmental regulations.
   • Do not dispose of the device in household waste; it should be recycled or disposed of through approved channels.

(For reference only)