Details

---

BUY V23201-L1003-A502 https://www.utsource.net/itm/p/12606280.html

Parameter	Value	Unit
Part Number	V23201-L1003-A502	-
Type	Voltage Regulator	-
Input Voltage	4.5 to 28	V
Output Voltage	5.0	V
Output Current	1.5	A
Dropout Voltage	1.2	V
Quiescent Current	5.0	mA
Operating Temp.	-40 to 125	掳C
Package	TO-220	-

Instructions:

1. Mounting:

   • Ensure the PCB has sufficient clearance for the TO-220 package.
   • Use a heat sink if continuous high output current is required.

2. Soldering:

   • Preheat the PCB to 70掳C to 90掳C.
   • Solder the leads within 3 seconds to avoid thermal damage.
   • Allow the component to cool naturally after soldering.

3. Input and Output Capacitors:

   • Place a 10 渭F tantalum capacitor close to the input pin to stabilize the input voltage.
   • Place a 10 渭F tantalum capacitor close to the output pin to stabilize the output voltage.

4. Power Supply:

   • Ensure the input voltage is within the specified range (4.5V to 28V).
   • Use a suitable power source that can provide the necessary current.

5. Output Load:

   • Do not exceed the maximum output current of 1.5A.
   • If higher currents are needed, consider using a heatsink or a more powerful regulator.

6. Thermal Management:

   • Monitor the temperature of the regulator during operation.
   • Use a heatsink if the temperature exceeds 85掳C.

7. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Handle with care to avoid mechanical stress on the leads and body.

(For reference only)