Details

---

BUY DLR2416Z https://www.utsource.net/itm/p/12606288.html

Parameter	Description	Value
Part Number	DLR2416Z	-
Type	Rectifier Diode	-
Package	DO-204AD (Mini MELF)	-
Maximum Reverse Voltage (VRSM)	Maximum reverse voltage the diode can withstand without breakdown	1000 V
Maximum RMS Voltage (VRMS)	Maximum RMS voltage the diode can handle	707 V
Maximum Average Forward Current (IF(AV))	Maximum average forward current the diode can conduct continuously	1.5 A
Peak Forward Surge Current (IF(SM))	Maximum peak forward surge current the diode can handle for a short duration	80 A
Forward Voltage Drop (VF)	Voltage drop across the diode when conducting forward current at IF = 1.5 A	1.1 V
Reverse Recovery Time (trr)	Time it takes for the diode to switch from forward to reverse conduction	35 ns
Operating Temperature Range (TJ)	Junction temperature range for normal operation	-55掳C to +175掳C
Storage Temperature Range (TSTG)	Temperature range for storage	-65掳C to +150掳C
Mounting Type	Surface Mount	-
Lead Finish	Tin	-

Instructions for Use:

1. Handling Precautions:

   • Handle the DLR2416Z with care to avoid mechanical damage.
   • Avoid exposure to high temperatures and humidity during storage and handling.

2. Soldering:

   • Use a soldering iron with a temperature setting between 260掳C and 300掳C.
   • Soldering time should not exceed 10 seconds per joint.
   • Allow the diode to cool naturally after soldering to prevent thermal shock.

3. Mounting:

   • Ensure proper alignment of the diode on the PCB before soldering.
   • Follow the recommended PCB layout guidelines to ensure optimal performance and heat dissipation.

4. Electrical Connections:

   • Connect the cathode (marked with a band) to the positive side of the circuit.
   • Connect the anode to the negative side of the circuit.

5. Thermal Management:

   • For applications where the diode will operate near its maximum current or voltage ratings, consider using a heatsink to improve thermal performance.

6. Testing:

   • After assembly, test the diode to ensure it is functioning correctly. Use a multimeter to check for continuity and reverse bias characteristics.

7. Storage:

   • Store the diode in a dry, cool place away from direct sunlight and corrosive environments.

8. Compliance:

   • Ensure that the use of the DLR2416Z complies with all relevant safety and regulatory standards for your application.

(For reference only)