Details

---

BUY REF01CP https://www.utsource.net/itm/p/12606290.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	VI	-	2.7	-	36	V
Output Voltage	VO	No Load	-	2.5	-	V
Line Regulation	ΔVO/ΔVI	VI = 2.7 to 36V, IO = 0mA	-	0.01	-	%
Load Regulation	ΔVO/ΔIO	VI = 5V, IO = 0 to 10mA	-	0.01	-	%
Temperature Coefficient	TCVO	VI = 5V, IO = 0mA, TA = -40 to +85°C	-	5	-	ppm/°C
Output Current	IO	Continuous	-	10	-	mA
Quiescent Current	IQ	VI = 5V, No Load	-	10	-	μA
Dropout Voltage	VDROP	IO = 10mA	-	1.5	-	V
Operating Temperature Range	TA	-	-40	-	85	°C
Storage Temperature Range	TSTG	-	-65	-	150	°C

Instructions for Using REF01CP

1. Power Supply Connection:

   • Connect the input voltage (V_I) to the V_IN pin.
   • Ensure the input voltage is within the specified range (2.7V to 36V).

2. Output Connection:

   • Connect the output voltage (V_O) to the V_OUT pin.
   • The typical output voltage is 2.5V with no load.

3. Ground Connection:

   • Connect the ground (GND) pin to the common ground of your circuit.

4. Capacitor Requirements:

   • Place a 0.1μF ceramic capacitor between the V_OUT and GND pins as close as possible to the device to ensure stability.
   • Optionally, a 10μF tantalum capacitor can be added in parallel for additional filtering.

5. Thermal Considerations:

   • Ensure adequate heat dissipation if the device is operating at high current or in high ambient temperatures.
   • The maximum operating temperature is 85°C, and the storage temperature range is -65°C to 150°C.

6. Load Regulation:

   • The device maintains a very low load regulation of 0.01% over the output current range from 0 to 10mA.

7. Line Regulation:

   • The line regulation is also very low at 0.01%, ensuring stable output voltage over the input voltage range.

8. Temperature Coefficient:

   • The temperature coefficient is 5 ppm/°C, which means the output voltage will vary by 5 parts per million per degree Celsius change in temperature.

9. Quiescent Current:

   • The quiescent current is very low at 10 μA, making the REF01CP suitable for battery-powered applications.

10. Dropout Voltage:

    • The dropout voltage is 1.5V at 10mA, which is the minimum difference between the input and output voltages required for proper operation.

11. Storage and Handling:

    • Store the device in a dry, cool place within the specified storage temperature range.
    • Handle the device with care to avoid static discharge and physical damage.

(For reference only)