Details

---

BUY DP83848LFQSQE https://www.utsource.net/itm/p/12606292.html

Parameter	Description	Conditions	Min	Typ	Max	Unit
Supply Voltage (VDD)	Operating supply voltage	Normal operation	2.7	-	3.6	V
Data Rate	Maximum data rate supported	Differential signaling	-	-	100	Mbps
Output Current	Maximum output current per driver	Differential signaling	-	-	32	mA
Power Consumption	Active mode power consumption	Normal operation	-	150	-	mW
Operating Temperature	Temperature range for normal operation	-	-40	-	85	掳C
Storage Temperature	Temperature range for storage	-	-65	-	150	掳C

Instructions for DP83848LFQSQE:

1. Power Supply Requirements:

   • Ensure the supply voltage (VDD) is within the range of 2.7V to 3.6V for stable operation.

2. Data Transmission:

   • The device supports up to 100 Mbps data rate over differential signaling lines. Verify that your application does not exceed this limit.

3. Current Handling:

   • Do not exceed the maximum output current of 32mA per driver to prevent damage to the device.

4. Power Management:

   • The active mode power consumption is typically 150mW. Design your power management system accordingly to ensure efficient energy use.

5. Operating Environment:

   • Operate the device within a temperature range of -40掳C to 85掳C for optimal performance.
   • For storage, ensure temperatures do not fall below -65掳C or rise above 150掳C.

6. Installation and Handling:

   • Handle with care to avoid electrostatic discharge (ESD) damage. Use appropriate ESD protection measures during installation and handling.

(For reference only)