Details

---

BUY DTC102 https://www.utsource.net/itm/p/12606298.html

Parameter	Description	Min	Typ	Max	Unit
Input Voltage (Vcc)	Operating voltage range	4.5	-	5.5	V
Output Current (Iout)	Maximum continuous output current	-	2	3	A
Dropout Voltage (Vdo)	Voltage difference between input and output when fully loaded	0.3	-	1.0	V
Quiescent Current (Iq)	Current consumed by the regulator itself	0.5	-	1.5	mA
Thermal Shutdown Temperature (Tsh)	Temperature at which the device shuts down to prevent damage	-	175	-	掳C
Protection Features	Overcurrent, thermal, and short-circuit protection	-	Yes	-	-

Instructions for Using DTC102

1. Power Supply Connection:

   • Connect the input voltage (Vcc) to the VIN pin.
   • Ensure the input voltage is within the specified range (4.5V to 5.5V).

2. Output Connection:

   • Connect the load to the VOUT pin.
   • The maximum continuous output current is 2A, with a peak of up to 3A.

3. Ground Connection:

   • Connect the GND pin to the ground of your circuit.

4. Thermal Management:

   • Ensure adequate heat dissipation if operating near the maximum output current.
   • The device will automatically shut down if the temperature exceeds 175掳C.

5. Protection Features:

   • The DTC102 includes overcurrent, thermal, and short-circuit protection to safeguard the device and connected components.

6. Capacitors:

   • Use appropriate input and output capacitors to stabilize the voltage and reduce ripple.
   • Recommended values: 10渭F ceramic capacitor on the input and 10渭F ceramic capacitor on the output.

7. PCB Layout:

   • Place the DTC102 close to the power source and load to minimize trace resistance and inductance.
   • Use wide traces or planes for power and ground connections to improve thermal performance.

8. Testing:

   • Before connecting the load, test the output voltage with a multimeter to ensure it is within the expected range.
   • Gradually increase the load to verify the stability and performance of the regulator.

9. Storage:

   • Store the DTC102 in a dry, cool place away from static sources.
   • Handle with care to avoid damage to the pins and internal components.

(For reference only)