Details

---

BUY TQ2-12V https://www.utsource.net/itm/p/12606317.html

Parameter	Description	Value
Model	Model Number	TQ2-12V
Type	Relay Type	SPDT (Single Pole Double Throw)
Voltage	Coil Voltage	12V DC
Current	Coil Current	40mA
Power	Coil Power Consumption	0.48W
Contact Form	Contact Configuration	1C/O + 1C/C
Contact Rating	Contact Load (Resistive)	10A at 250V AC
Insulation Resistance	Between Contacts and Coil	>100M惟 at 500V DC
Dielectric Strength	Between Contacts and Coil	1500V AC for 1 minute
Operating Temperature	Operating Temperature Range	-40掳C to +85掳C
Storage Temperature	Storage Temperature Range	-40掳C to +125掳C
Mechanical Life	Mechanical Operations	10 million cycles
Electrical Life	Electrical Operations (at rated load)	100,000 cycles
Weight	Weight	10g

Instructions for Use:

1. Installation:

   • Ensure the relay is mounted on a flat, stable surface.
   • Use the provided mounting holes or clips for secure installation.

2. Wiring:

   • Connect the coil terminals to a 12V DC power supply.
   • Connect the common (COM) terminal to the circuit you wish to control.
   • Connect the normally open (NO) and normally closed (NC) terminals to the respective parts of your circuit.

3. Operation:

   • When the coil is energized (12V DC applied), the relay will switch from the NC to the NO contact.
   • When the coil is de-energized, the relay will return to its default state (NC contact).

4. Safety Precautions:

   • Do not exceed the rated voltage and current for the coil and contacts.
   • Ensure proper insulation and isolation to prevent electrical shock.
   • Avoid operating the relay in environments with high humidity, corrosive gases, or excessive dust.

5. Maintenance:

   • Regularly inspect the relay for signs of wear or damage.
   • Clean the relay using a soft, dry cloth. Avoid using abrasive materials or solvents.

6. Troubleshooting:

   • If the relay fails to operate, check the power supply and connections.
   • If the relay operates intermittently, check for loose connections or damaged components.
   • If the relay is noisy, ensure it is securely mounted and free from external vibrations.

(For reference only)