G2RL-14-E-12VDC

G2RL-14-E-12VDC


Specifications
SKU
12606329
Details

BUY G2RL-14-E-12VDC https://www.utsource.net/itm/p/12606329.html

Parameter Value
Part Number G2RL-14-E-12VDC
Type Relay
Supply Voltage 12V DC
Coil Power Consumption 1.5W (Max)
Contact Form SPDT (Single Pole Double Throw)
Contact Rating 10A, 250V AC (Resistive Load)
Insulation Resistance 100M惟 (Min) at 500V DC
Dielectric Strength 2500V AC (Min) for 1 minute
Contact Resistance 50m惟 (Max)
Operating Temperature -40掳C to +85掳C
Storage Temperature -40掳C to +125掳C
Mechanical Life 10,000,000 cycles (Min)
Electrical Life 100,000 cycles (Min)
Weight 10g (Approx.)

Instructions for Use

  1. Power Supply:

    • Ensure the supply voltage is 12V DC to avoid damage to the relay.
    • Use a stable power source to prevent voltage fluctuations.
  2. Installation:

    • Mount the relay on a flat, stable surface.
    • Ensure there is adequate ventilation to dissipate heat, especially if the relay will be operating continuously.
  3. Wiring:

    • Connect the coil terminals to the 12V DC power supply.
    • Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.
    • Ensure all connections are secure and free from short circuits.
  4. Operation:

    • When the coil is energized, the relay will switch the contacts from their normal position to the opposite position.
    • The relay can be used to control various types of loads, including resistive, inductive, and capacitive loads, within the specified contact rating.
  5. Maintenance:

    • Regularly inspect the relay for signs of wear or damage.
    • Clean the relay with a dry, soft cloth to remove dust and debris.
    • Do not use solvents or abrasive materials that could damage the relay.
  6. Safety Precautions:

    • Always disconnect the power supply before handling the relay.
    • Avoid exposing the relay to excessive moisture, corrosive gases, or mechanical shock.
    • Do not exceed the maximum ratings specified in the parameter table.
  7. Disposal:

    • Dispose of the relay in accordance with local environmental regulations.
(For reference only)

View more about G2RL-14-E-12VDC on main site