Details

---

BUY 2SC1263-Q https://www.utsource.net/itm/p/12606341.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Collector-Emitter Voltage	VCEO	-	-	80	V	Maximum voltage between collector and emitter with the base open.
Collector-Base Voltage	VCBO	-	-	90	V	Maximum voltage between collector and base with the emitter open.
Emitter-Base Voltage	VEBO	-	-	5	V	Maximum voltage between emitter and base with the collector open.
Collector Current	IC	-	-	1.5	A	Maximum continuous collector current.
Base Current	IB	-	-	0.15	A	Maximum continuous base current.
Power Dissipation	PT	-	-	65	W	Maximum power dissipation at TA = 25掳C.
Junction Temperature	TJ	-	-	150	掳C	Maximum junction temperature.
Storage Temperature Range	TSTG	-55	-	150	掳C	Operating temperature range for storage.
Transition Frequency	fT	-	300	-	MHz	Frequency at which the current gain drops to 1.
DC Current Gain	hFE	20	100	400	-	Typical DC current gain at IC = 150mA, VCE = 10V.

Instructions:

1. Handling Precautions:

   • Avoid exceeding the maximum ratings listed in the table to prevent damage to the transistor.
   • Use appropriate heat sinks when operating at high power levels to maintain the junction temperature within safe limits.

2. Mounting:

   • Ensure proper mounting to avoid mechanical stress on the leads.
   • Use thermal compound between the transistor and heat sink for efficient heat dissipation.

3. Soldering:

   • Soldering temperature should not exceed 300掳C for more than 10 seconds.
   • Allow the device to cool down before handling or testing.

4. Storage:

   • Store in a dry place within the specified storage temperature range.
   • Handle with care to avoid static discharge, which can damage the device.

5. Testing:

   • Test the device under controlled conditions to ensure it meets the specified parameters.
   • Use a suitable tester or circuit to measure the DC current gain (h_FE) and other parameters.

6. Application:

   • The 2SC1263-Q is suitable for general-purpose amplification and switching applications.
   • Ensure the operating conditions (voltage, current, temperature) are within the specified limits for reliable performance.

(For reference only)