Details

---

BUY RTB14024F https://www.utsource.net/itm/p/12606342.html

Parameter	Symbol	Conditions	Min	Typ	Max	Unit
Input Voltage	V_IN	-	2.7	-	5.5	V
Output Voltage	V_OUT	-	-	3.3	-	V
Quiescent Current	I_Q	V_IN = 5V, I_OUT = 0mA	-	1.5	-	渭A
Dropout Voltage	V_DROPOUT	I_OUT = 100mA, V_IN = 5V	-	0.3	-	V
Output Current	I_OUT	-	-	250	-	mA
Power Dissipation	P_DISS	T_A = 25掳C	-	-	625	mW
Operating Temperature	T_OP	-	-40	-	85	掳C

Instructions for Use:

1. Input Voltage (V_IN):

   • Ensure the input voltage is within the range of 2.7V to 5.5V to avoid damage or improper operation.

2. Output Voltage (V_OUT):

   • The RTB14024F provides a fixed output voltage of 3.3V. No external components are required for voltage setting.

3. Quiescent Current (I_Q):

   • The quiescent current is very low at 1.5渭A when the input voltage is 5V and no load is applied. This makes it suitable for battery-operated devices.

4. Dropout Voltage (V_DROPOUT):

   • The dropout voltage is as low as 0.3V at an output current of 100mA, ensuring efficient operation even when the input voltage is close to the output voltage.

5. Output Current (I_OUT):

   • The regulator can supply up to 250mA of continuous output current.

6. Power Dissipation (P_DISS):

   • Ensure that the power dissipation does not exceed 625mW to prevent overheating. Consider heatsinking if operating near this limit.

7. Operating Temperature (T_OP):

   • The device operates reliably between -40掳C and +85掳C ambient temperature.

8. Installation:

   • Mount the device on a PCB with adequate clearance to allow for proper heat dissipation.
   • Use bypass capacitors on both input and output sides to ensure stability and reduce noise.

9. Handling:

   • Handle with care to avoid electrostatic discharge (ESD) damage. Follow standard ESD protection guidelines during handling and installation.

(For reference only)