Details

---

BUY YG952S6 https://www.utsource.net/itm/p/12606344.html

Parameter	Description	Value
Part Number	Part number of the component	YG952S6
Type	Type of component	SMD Inductor
Package	Package type	0603
Inductance	Inductance value	6.0 渭H
Tolerance	Tolerance of inductance	卤20%
DC Resistance	DC resistance	0.18 惟
Rated Current	Maximum current the inductor can handle without significant temperature rise	1.1 A
Saturation Current	Current at which inductance drops by 30%	1.4 A
Operating Temperature	Range of temperatures the inductor can operate within	-55掳C to +125掳C
Frequency Range	Frequency range for optimal performance	1 MHz to 100 MHz
Shielding	Magnetic shielding type	Shielded
Mounting	Mounting method	Surface Mount
RoHS Compliance	Compliance with RoHS standards	Yes

Instructions for Use:

1. Handling:

   • Handle the YG952S6 with care to avoid mechanical damage.
   • Use appropriate ESD (Electrostatic Discharge) protection when handling.

2. Soldering:

   • Preheat the PCB to 100掳C to 120掳C before soldering.
   • Use a soldering iron with a temperature setting of 260掳C to 300掳C.
   • Ensure the soldering time does not exceed 3 seconds per terminal.
   • Avoid excessive thermal shock during soldering.

3. Mounting:

   • Place the YG952S6 on the PCB with the correct orientation.
   • Ensure the component is securely soldered to the PCB.
   • Inspect the solder joints for proper wetting and absence of voids or cold solder joints.

4. Storage:

   • Store the YG952S6 in a dry, cool place away from direct sunlight.
   • Keep the components in their original packaging until ready for use.

5. Testing:

   • Verify the inductance value using an LCR meter.
   • Check the DC resistance to ensure it meets the specified tolerance.
   • Test the component under operating conditions to ensure it meets the required performance specifications.

6. Applications:

   • Suitable for use in power supply circuits, filtering applications, and signal processing circuits.
   • Ideal for high-frequency applications where low DC resistance and high saturation current are required.

(For reference only)