Details

---

BUY DMX512AW https://www.utsource.net/itm/p/12606354.html

Parameter	Description
Part Number	DMX512AW
Type	DMX512 Controller
Channels	512 Channels
Communication Protocol	DMX512 (E1.11)
Data Rate	250 kbps
Transmission Distance	Up to 300 meters with standard DMX cable
Power Supply	5V DC
Current Consumption	< 100mA
Operating Temperature	-20掳C to +70掳C
Storage Temperature	-40掳C to +85掳C
Dimensions	80mm x 50mm x 20mm
Weight	50g
Connectors	3-pin XLR (In/Out)
LED Indicators	Power, DMX In, DMX Out
Mounting	Surface mount or DIN rail

Instructions

1. Power Connection:

   • Connect the 5V DC power supply to the DMX512AW controller.
   • Ensure the power supply is stable and within the specified range.

2. DMX Cable Connection:

   • Use a standard 3-pin XLR cable to connect the DMX512AW to your lighting fixtures or other DMX devices.
   • Connect the DMX In port to the DMX Out port of the previous device in the chain, or directly to the DMX source.
   • Connect the DMX Out port to the DMX In port of the next device in the chain.

3. Address Setting:

   • Set the DMX address for the DMX512AW using the DIP switches or the software interface, if available.
   • Ensure that each device on the DMX network has a unique address.

4. Configuration:

   • Use the provided software or the physical buttons on the DMX512AW to configure settings such as baud rate, channel count, and other parameters.
   • Refer to the user manual for specific configuration options and procedures.

5. Operation:

   • Power on the DMX512AW and ensure all LED indicators are functioning correctly.
   • Send DMX signals from your control console to the DMX512AW and observe the response from connected devices.
   • Adjust the settings as needed to achieve the desired lighting effects.

6. Maintenance:

   • Regularly check the connections and cables for any signs of wear or damage.
   • Keep the DMX512AW and its environment clean and free from dust and debris.
   • Store the DMX512AW in a dry and cool place when not in use.

7. Troubleshooting:

   • If the DMX512AW does not respond, check the power supply and DMX connections.
   • Ensure that the DMX address is set correctly and that there are no conflicts with other devices.
   • Consult the user manual or contact technical support for further assistance.

(For reference only)