Details

---

BUY AP9974GP https://www.utsource.net/itm/p/12606357.html

Parameter	Symbol	Min	Typical	Max	Unit
Input Voltage	V_IN	2.7	-	5.5	V
Output Voltage	V_OUT	1.8	-	3.3	V
Output Current	I_OUT	-	700	-	mA
Quiescent Current	I_Q	-	25	-	渭A
Shutdown Current	I_SD	-	0.1	-	渭A
Efficiency (Typical)	畏	-	90	-	%
Operating Temperature	T_OP	-40	-	85	掳C
Storage Temperature	T_STG	-65	-	150	掳C
Package Type	-	-	SOT-23	-

Instructions for Using AP9974GP

1. Input Voltage (V_IN):

   • Ensure the input voltage is within the range of 2.7V to 5.5V.
   • Use appropriate decoupling capacitors (typically 1渭F ceramic) close to the input pin to stabilize the input voltage.

2. Output Voltage (V_OUT):

   • The output voltage can be set using external resistors. Refer to the datasheet for the specific resistor values required for your desired output voltage.
   • Use a 10渭F tantalum or ceramic capacitor on the output to filter out noise and stabilize the output.

3. Output Current (I_OUT):

   • The device can provide up to 700mA of output current. Ensure that the load does not exceed this limit to avoid overheating or damage.
   • For high current applications, consider adding heat sinks or ensuring adequate airflow around the device.

4. Quiescent Current (I_Q):

   • The quiescent current is typically 25渭A. This is the current consumed by the device when it is active but not supplying any load.

5. Shutdown Current (I_SD):

   • When the shutdown pin is pulled low, the device enters a low-power mode with a typical shutdown current of 0.1渭A.
   • Use a pull-down resistor to ensure the shutdown pin is properly grounded when not in use.

6. Efficiency (畏):

   • The typical efficiency of the AP9974GP is 90%. Ensure proper PCB layout and component selection to achieve optimal efficiency.

7. Operating Temperature (T_OP):

   • The device is designed to operate within a temperature range of -40掳C to 85掳C. Avoid operating the device outside this range to prevent performance degradation or failure.

8. Storage Temperature (T_STG):

   • Store the device in a dry environment with temperatures between -65掳C and 150掳C to maintain its integrity.

9. Package Type:

   • The AP9974GP is available in a SOT-23 package. Follow standard soldering guidelines for surface mount components to ensure reliable connections.

10. General Handling:

    • Handle the device with care to avoid static discharge, which can damage the internal circuits.
    • Follow anti-static precautions such as using wrist straps and static-free work areas.

For more detailed information, refer to the official datasheet of the AP9974GP.

(For reference only)