Details

---

BUY MB7124L https://www.utsource.net/itm/p/12606374.html

Parameter	Symbol	Min	Typ	Max	Unit	Description
Supply Voltage	Vcc	2.0	3.3	5.5	V	Operating supply voltage range
Output Current	Iout	-	100	200	mA	Maximum output current
Quiescent Current	Iq	10	20	30	渭A	Current consumed when no load is applied
Operating Temp.	Toper	-40	-	85	掳C	Temperature range for normal operation
Storage Temp.	Tstg	-65	-	150	掳C	Temperature range for storage
Output Voltage	Vout	0.0	-	Vcc	V	Output voltage range
Rise Time	tr	-	10	20	ns	Time to rise from 10% to 90% of Vout
Fall Time	tf	-	10	20	ns	Time to fall from 90% to 10% of Vout
Enable Input High	VinH	2.0	-	Vcc	V	Voltage level to activate the enable input
Enable Input Low	VinL	0.0	-	0.8	V	Voltage level to deactivate the enable input
Thermal Shutdown	Tsd	-	150	-	掳C	Temperature at which the device shuts down

Instructions for Using MB7124L

1. Supply Voltage (Vcc):

   • Ensure the supply voltage is within the range of 2.0V to 5.5V.
   • Connect the positive terminal of the power supply to the Vcc pin and the negative terminal to the GND pin.

2. Output Current (Iout):

   • The maximum output current is 200mA, but it is recommended to keep it below 100mA for reliable operation.
   • Connect the load between the Vout pin and GND.

3. Quiescent Current (Iq):

   • The quiescent current is typically around 20渭A, which is the current consumed by the device when no load is applied.

4. Operating Temperature (Toper):

   • The device operates reliably within the temperature range of -40掳C to 85掳C.
   • Avoid operating the device outside this range to prevent damage or reduced performance.

5. Storage Temperature (Tstg):

   • Store the device in an environment with temperatures ranging from -65掳C to 150掳C to ensure long-term reliability.

6. Output Voltage (Vout):

   • The output voltage can range from 0V to the supply voltage (Vcc).
   • Ensure the load connected to Vout is compatible with the output voltage.

7. Rise and Fall Time (tr, tf):

   • The rise and fall times are typically around 10ns, ensuring fast switching times.
   • These parameters are important for applications requiring high-speed switching.

8. Enable Input (VinH, VinL):

   • To activate the device, apply a voltage greater than 2.0V to the enable input (VinH).
   • To deactivate the device, apply a voltage less than 0.8V to the enable input (VinL).

9. Thermal Shutdown (Tsd):

   • The device will automatically shut down if the temperature exceeds 150掳C to prevent damage.
   • Allow the device to cool down before reactivating it.

By following these parameters and instructions, you can ensure the MB7124L operates efficiently and reliably in your application.

(For reference only)