Details

---

BUY H7N1004DSTL-E https://www.utsource.net/itm/p/12606387.html

Parameter	Description	Min	Typ	Max	Unit
Supply Voltage (Vcc)	Operating voltage range	2.7	-	5.5	V
Output Current (Iout)	Maximum output current	-	100	-	mA
Output Voltage (Vout)	Output voltage at nominal conditions	3.3	-	3.3	V
Quiescent Current (Iq)	Current consumption when no load is applied	1	-	5	渭A
Dropout Voltage (Vdo)	Difference between input and output voltage for regulation	0.2	-	0.5	V
Load Regulation	Change in output voltage due to load changes	-	0.5	-	%
Line Regulation	Change in output voltage due to input voltage changes	-	0.1	-	%
Ripple Rejection	Ability to reject input ripple	-	60	-	dB
Operating Temperature (Toper)	Range of ambient temperatures for operation	-40	-	85	掳C
Storage Temperature (Tstg)	Range of temperatures for storage	-65	-	150	掳C
Package Type	Physical package of the component	-	-	-	SOT-23

Instructions for H7N1004DSTL-E

1. Supply Voltage:

   • Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V to avoid damage or improper operation.

2. Output Current:

   • The maximum output current (Iout) is 100mA. Do not exceed this limit to prevent overheating or failure.

3. Output Voltage:

   • The output voltage (Vout) is fixed at 3.3V. This value should be maintained under nominal operating conditions.

4. Quiescent Current:

   • The quiescent current (Iq) is typically 1渭A and can go up to 5渭A. This is the current consumed by the regulator when there is no load.

5. Dropout Voltage:

   • The dropout voltage (Vdo) is the minimum difference between the input and output voltages required for regulation. It ranges from 0.2V to 0.5V.

6. Load Regulation:

   • The load regulation is 0.5%, meaning the output voltage will change by 0.5% for load variations.

7. Line Regulation:

   • The line regulation is 0.1%, indicating the output voltage will change by 0.1% for input voltage variations.

8. Ripple Rejection:

   • The ripple rejection is 60dB, which means the regulator can effectively reduce input ripple by 60dB.

9. Operating Temperature:

   • The operating temperature range (Toper) is from -40掳C to 85掳C. Ensure the device operates within this range to maintain reliability.

10. Storage Temperature:

    • The storage temperature range (Tstg) is from -65掳C to 150掳C. Store the device in this range to prevent damage.

11. Package Type:

    • The H7N1004DSTL-E is available in a SOT-23 package. Follow standard soldering and handling procedures for this package type.

12. Application Notes:

    • Use appropriate decoupling capacitors (typically 1渭F ceramic) on both the input and output sides to ensure stable operation.
    • Ensure proper heat dissipation if operating near the maximum output current to prevent thermal shutdown.
    • Refer to the datasheet for detailed application circuits and recommended layouts.

(For reference only)