Details

---

BUY G2RL-2-12V https://www.utsource.net/itm/p/12606388.html

Parameter	Description	Value
Part Number	Device identifier	G2RL-2-12V
Type	Relay type	SPDT (Single Pole, Double Throw)
Coil Voltage	Operating voltage of the relay coil	12V DC
Coil Power	Power consumption of the coil	0.6W
Coil Resistance	Resistance of the coil	240惟
Contact Form	Configuration of relay contacts	SPDT
Contact Rating	Maximum current and voltage the contacts can handle	10A, 250VAC
Insulation Voltage	Maximum voltage between contacts and coil	1000VAC
Operating Temperature	Temperature range for operation	-40掳C to +85掳C
Weight	Weight of the relay	35g

Instructions:

1. Installation:

   • Ensure the relay is mounted on a flat surface.
   • Secure the relay using the provided mounting hardware or appropriate methods.

2. Connection:

   • Connect the coil terminals to the control circuit providing 12V DC.
   • Connect the common (COM), normally open (NO), and normally closed (NC) contacts as required by your application.

3. Operation:

   • When 12V DC is applied to the coil, the relay will energize, causing the contacts to switch from NC to NO.
   • When power is removed from the coil, the relay de-energizes, and the contacts return to their default NC state.

4. Maintenance:

   • Periodically inspect connections and mounting for any signs of wear or looseness.
   • Ensure operating environment does not exceed specified temperature limits.

5. Safety Precautions:

   • Do not exceed the contact ratings to prevent damage or failure.
   • Ensure proper insulation and isolation to avoid electrical hazards.

(For reference only)