Details

---

BUY EX2-2K1J https://www.utsource.net/itm/p/12606392.html

Parameter	Description	Value
Part Number	Full part number	EX2-2K1J
Type	Type of component	Fixed Resistor
Resistance	Resistance value	2.1 k惟
Tolerance	Tolerance of resistance	卤5%
Power Rating	Maximum power rating	0.25 W
Operating Temp	Operating temperature range	-55掳C to +125掳C
Material	Material used for resistor	Carbon Film
Package	Package type	Axial Lead
Termination	Termination style	Through-Hole
Compliance	Compliance standards	RoHS, REACH

Instructions for Use:

1. Handling:

   • Handle the resistor with care to avoid damaging the leads or body.
   • Do not apply excessive force when bending the leads.

2. Soldering:

   • Preheat the PCB to 100掳C to 150掳C before soldering.
   • Use a soldering iron with a temperature setting between 300掳C and 350掳C.
   • Solder each lead for no more than 3 seconds to prevent heat damage to the resistor.

3. Mounting:

   • Ensure the resistor is mounted securely on the PCB.
   • Trim the leads to a length of approximately 1.5 mm after soldering.

4. Storage:

   • Store in a dry, cool place away from direct sunlight.
   • Avoid exposure to corrosive gases or liquids.

5. Testing:

   • Use a multimeter to verify the resistance value before installation.
   • Ensure the measured value is within the specified tolerance range (卤5%).

6. Disposal:

   • Dispose of the resistor according to local environmental regulations.
   • Recycle if possible, following guidelines for electronic waste.

(For reference only)