Details

---

BUY DIP-1T-12D https://www.utsource.net/itm/p/12606404.html

Parameter	Description	Value
Package Type	Dual In-line Package (DIP)	DIP
Number of Terminals	Number of Terminals	1
Number of Diodes	Number of Diodes	12
Forward Voltage (Vf)	Forward Voltage at Rated Current	0.7 V (Typical)
Reverse Voltage (Vr)	Maximum Reverse Voltage	50 V
Forward Current (If)	Maximum Forward Current	1 A
Peak Reverse Current (Irm)	Peak Reverse Current (Non-Repetitive)	5 A
Operating Temperature	Operating Temperature Range	-55掳C to +150掳C
Storage Temperature	Storage Temperature Range	-65掳C to +150掳C
Thermal Resistance (Rth)	Junction to Ambient Thermal Resistance	25掳C/W
Power Dissipation (Pd)	Maximum Power Dissipation	5 W
Isolation Voltage (Viso)	Isolation Voltage Between Terminals	1000 Vrms
Mounting Type	Mounting Type	Through-Hole
Lead Pitch	Lead Pitch	2.54 mm
Body Size	Body Size (L x W x H)	18.3 mm x 9.5 mm x 7.6 mm

Instructions for Use:

1. Handling:

   • Handle the DIP-1T-12D with care to avoid damage to the leads and body.
   • Use proper ESD (Electrostatic Discharge) protection when handling to prevent damage.

2. Soldering:

   • Preheat the board to 100掳C to 120掳C before soldering.
   • Soldering temperature should not exceed 350掳C.
   • Soldering time should not exceed 10 seconds per lead.
   • Allow the device to cool naturally after soldering.

3. Mounting:

   • Ensure the leads are properly aligned with the PCB holes.
   • Secure the device to the PCB using a clamp or holder during soldering to prevent movement.
   • After soldering, inspect the joints for quality and ensure no shorts or cold solder joints.

4. Testing:

   • Test the device under specified operating conditions to ensure it meets the required performance parameters.
   • Use a multimeter to check for continuity and resistance values as needed.

5. Storage:

   • Store the device in a dry, cool place away from direct sunlight.
   • Keep the device in its original packaging until ready for use to protect against moisture and static.

6. Operational Considerations:

   • Ensure the device is operated within the specified voltage and current limits to avoid damage.
   • Use appropriate heat sinks if the device will be operating at high power levels to maintain thermal stability.

7. Safety:

   • Follow all safety guidelines and regulations when working with electrical components.
   • Do not exceed the maximum ratings listed in the parameter table to prevent failure or damage to the device.

(For reference only)