Details

---

BUY 2SA1294/2SC3263 https://www.utsource.net/itm/p/12606406.html

Parameter	2SA1294 (PNP)	2SC3263 (NPN)
Type	PNP Transistor	NPN Transistor
Collector-Emitter Voltage (Vce)	500V	500V
Emitter-Base Voltage (Veb)	7V	7V
Collector Current (Ic)	15A	15A
Base Current (Ib)	3A	3A
Power Dissipation (Ptot)	180W	180W
Storage Temperature Range (Tstg)	-55掳C to +150掳C	-55掳C to +150掳C
Operating Temperature Range (Tamb)	-55掳C to +150掳C	-55掳C to +150掳C
hFE (Current Gain)	20 to 200	20 to 200
Transition Frequency (ft)	1.5MHz	1.5MHz
Package	TO-3	TO-3

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain operating temperatures within specified limits.
   • Use insulated mounting hardware to prevent short circuits.

2. Biasing:

   • For 2SA1294 (PNP):
     • Connect the emitter to the positive supply.
     • Apply a negative base voltage relative to the emitter to turn the transistor on.
   • For 2SC3263 (NPN):
     • Connect the emitter to the ground or negative supply.
     • Apply a positive base voltage relative to the emitter to turn the transistor on.

3. Protection:

   • Use appropriate current-limiting resistors to protect the base-emitter junction from excessive current.
   • Consider adding a reverse-biased diode across the collector and emitter to protect against inductive load flyback.

4. Handling:

   • Handle with care to avoid mechanical damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage to the transistors.

5. Testing:

   • Use a multimeter to check for continuity and proper operation.
   • Verify that the transistor is not shorted or open by measuring the resistance between the leads.

6. Storage:

   • Store in a dry, cool place to prevent moisture damage.
   • Keep away from direct sunlight and sources of heat.

7. Applications:

   • Suitable for high-power amplifiers, switching power supplies, and motor control circuits.

By following these guidelines, you can ensure reliable and efficient operation of the 2SA1294 and 2SC3263 transistors in your circuits.

(For reference only)