Details

---

BUY 2SB1560/2SD2390 https://www.utsource.net/itm/p/12606418.html

Parameter	2SB1560 (PNP)	2SD2390 (NPN)
Type	PNP Transistor	NPN Transistor
Collector-Emitter Voltage (Vce)	140 V	140 V
Collector-Base Voltage (Vcb)	140 V	140 V
Emitter-Base Voltage (Veb)	5 V	5 V
Collector Current (Ic)	15 A	15 A
Power Dissipation (Ptot)	200 W	200 W
Continuous Collector Current (Icm)	15 A	15 A
Storage Temperature Range (Tstg)	-55掳C to +150掳C	-55掳C to +150掳C
Operating Junction Temperature (Tj)	-55掳C to +150掳C	-55掳C to +150掳C
DC Current Gain (hFE)	20 to 200	20 to 200
Transition Frequency (ft)	10 MHz	10 MHz
Case Style	TO-3P	TO-3P

Instructions for Use:

1. Mounting:

   • Ensure proper heat sinking to maintain the junction temperature within the specified range.
   • Use a thermal compound between the transistor and the heatsink for better heat dissipation.

2. Biasing:

   • For 2SB1560 (PNP):
     • Connect the base to a positive voltage relative to the emitter.
     • The collector should be connected to a higher potential than the emitter.
   • For 2SD2390 (NPN):
     • Connect the base to a positive voltage relative to the emitter.
     • The collector should be connected to a lower potential than the emitter.

3. Protection:

   • Use appropriate current-limiting resistors to prevent excessive base current.
   • Consider adding a flyback diode if the transistor is used with inductive loads to protect against voltage spikes.

4. Handling:

   • Handle the transistors with care to avoid mechanical damage.
   • Follow ESD (Electrostatic Discharge) precautions to prevent damage from static electricity.

5. Testing:

   • Test the transistors in a controlled environment to ensure they meet the specified parameters.
   • Use a multimeter or transistor tester to verify the functionality and parameters.

6. Storage:

   • Store the transistors in a dry, cool place away from direct sunlight and moisture.
   • Keep them in anti-static packaging to prevent damage.

7. Wiring:

   • Ensure all connections are secure and free from shorts or loose contacts.
   • Use insulated wires to prevent accidental short circuits.

8. Dissipation:

   • Monitor the temperature of the heatsink and transistor during operation to ensure it does not exceed the maximum operating temperature.

By following these guidelines, you can ensure the reliable and efficient operation of the 2SB1560 and 2SD2390 transistors.

(For reference only)