Details

---

BUY KIA7915PI-U/P https://www.utsource.net/itm/p/12606422.html

Parameter	Description	Value
Part Number	Full Part Number	KIA7915PI-U/P
Type	Device Type	15V, 1A Linear Regulator
Input Voltage Range	Operating Input Voltage	18V to 35V
Output Voltage	Fixed Output Voltage	15V
Output Current	Maximum Continuous Output Current	1A
Dropout Voltage	Typical Dropout Voltage at 1A	2.5V (max)
Quiescent Current	Quiescent Current	10mA (typical)
Thermal Shutdown	Thermal Shutdown Temperature	160掳C (typical)
Short-Circuit Protection	Short-Circuit Protection	Yes
Package	Package Type	TO-220
Operating Temperature Range	Operating Temperature	-40掳C to +125掳C
Storage Temperature Range	Storage Temperature	-65掳C to +150掳C
Mounting Type	Mounting Type	Through-Hole

Instructions for Use:

1. Circuit Design:

   • Ensure that the input voltage is within the specified range (18V to 35V).
   • Connect the input capacitor (typically 10渭F) close to the input pin to stabilize the input voltage.
   • Connect the output capacitor (typically 10渭F) close to the output pin to stabilize the output voltage.
   • Place the device on a heatsink if operating at high current or in high ambient temperatures to ensure proper thermal management.

2. Installation:

   • Solder the device onto the PCB with proper alignment and orientation.
   • Ensure that the leads are securely soldered and free from shorts or cold solder joints.
   • Verify that the heatsink is properly attached and thermally conductive paste is used if necessary.

3. Testing:

   • Apply the input voltage and measure the output voltage to ensure it is stable at 15V.
   • Check the quiescent current and ensure it is within the typical range.
   • Test the device under load conditions to verify the maximum output current and thermal performance.

4. Safety:

   • Do not exceed the maximum ratings to avoid damage to the device.
   • Ensure proper ventilation and cooling to prevent overheating.
   • Follow all relevant safety guidelines and standards when handling and testing the device.

(For reference only)