Details

---

BUY M68236-41 https://www.utsource.net/itm/p/12606425.html

Parameter	Symbol	Min	Typ	Max	Unit	Notes
Supply Voltage	Vcc	4.75	5	5.25	V
Operating Temperature	Toper	-40		85	掳C
Storage Temperature	Tstg	-65		150	掳C
Output Current per Pin	Iout		20	40	mA
Input Current	Iin		1	10	渭A
Propagation Delay Time	tpd	10	15	20	ns
Power Consumption	Pd		100	200	mW
Output Low Voltage Level	Vol	0	0.4	0.5	V
Output High Voltage Level	Voh	4.5	4.8	5	V

Instructions for Using M68236-41

1. Power Supply:

   • Ensure the supply voltage (Vcc) is within the range of 4.75V to 5.25V.
   • Use a stable power source to avoid fluctuations that can affect performance.

2. Temperature Considerations:

   • The operating temperature range is from -40掳C to 85掳C.
   • Store the device in an environment where the temperature does not exceed -65掳C to 150掳C.

3. Current Handling:

   • Each output pin can sink up to 40mA and source up to 20mA.
   • Input pins should not draw more than 10渭A to ensure proper operation.

4. Timing Parameters:

   • The propagation delay time (tpd) is typically around 15ns, with a minimum of 10ns and a maximum of 20ns.

5. Power Consumption:

   • The typical power consumption is 100mW, with a maximum of 200mW.

6. Output Levels:

   • When the output is low, the voltage level (Vol) should be between 0V and 0.5V.
   • When the output is high, the voltage level (Voh) should be between 4.5V and 5V.

7. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Store the device in a dry, cool place to prevent moisture damage.

8. Mounting and Soldering:

   • Follow standard soldering practices to avoid thermal shock and mechanical stress.
   • Use a soldering iron with a temperature setting appropriate for the device.

9. Testing:

   • Before integrating the device into a circuit, test it separately to ensure it meets the specified parameters.
   • Use a multimeter to check the supply voltage, input current, and output voltages.

10. Application Notes:

    • Refer to the datasheet for specific application notes and recommended circuit configurations.
    • For complex applications, consider consulting with a technical expert or the manufacturer.

(For reference only)